Addressing and VLAN

Solved
SD-WAN1
Conversationalist

Addressing and VLAN

Can I configure same addressing VLAN, switch port configuration to two different store networks?

1 Accepted Solution
alemabrahao
Kind of a big deal
Kind of a big deal

But at the level of control and organization it is not a good practice and in the future it avoids several headaches, without the need to do NAT if the two networks need to communicate.

 

You can, doesn't mean you should.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

View solution in original post

3 Replies 3
alemabrahao
Kind of a big deal
Kind of a big deal

No, you cannot have the same address from the same subnet in different VLANs.

 

They must be different addresses on different subnets.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
ww
Kind of a big deal
Kind of a big deal

you can have the same subnet in every network.

but you cant use the same subnet if you want them to use the vpn.

alemabrahao
Kind of a big deal
Kind of a big deal

But at the level of control and organization it is not a good practice and in the future it avoids several headaches, without the need to do NAT if the two networks need to communicate.

 

You can, doesn't mean you should.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels