System Manager Monitor SSID

Solved
dbelliss
Meraki Employee
Meraki Employee

System Manager Monitor SSID

I see on System Manager in the Manage Device tab, there is a heading for SSID. I am assuming this displayed the name of the Wifi, however I cannot get it to show on my devices. Is there any special setting I need to enable for this?

 

I am using iPads on iOS 12.3.

1 Accepted Solution
alexis_cazalaa
Building a reputation

Meraki SM app must be installed and running on the target devices

View solution in original post

3 Replies 3
alexis_cazalaa
Building a reputation

Meraki SM app must be installed and running on the target devices

Network-dad
A model citizen

Are your devices in DEP and do they have a supervised profile? If they are not the SSID setting will not be enforced.

 

WiFi

WiFi settings can be used to push out a wireless profile to your managed devices. Some example use cases for this feature are:

  • Providing an Internet connection for your devices, but do not want to explicitly provide the SSID name or credentials to the end-user.
  • Pushing out WPA2-Enterprise WiFI profiles with 802.1X authentication (EAP-MSCHAPv2, EAP-TLS, etc.) This can be further configured with "Trusted Certificates" that you upload, utilizing the "Credentials" feature described below

 

Dakota Snow | Network-dad Linkdedin
CMNO | A+ | ECMS2
Check out The Bearded I.T. Dad onThe Bearded I.T. DadThe Bearded I.T. Dad

It may not be enforced, but the SSID will be added.  Ditto on Android.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels