My music streamer (Linn DSM) is connected to the network by WiFi. In the house I have 3 AP (MR42E, MR30H, MR33).  Often the Linn DSM, which is close to the MR42E, connects to a farther away AP with a weaker signal and hiccups in the music. Is there a way to force it to connect to the MR42E ?    Many thanks !   LD   ... View more

Dear,   A long time ago I gave a Raspberry Pi a fixed IP adress. This Pi is gone , but now I want to reuse this fixed IP adress for a new one. But trying to do this, how can I set this IP adress free again?  can't find this on the Dashboard...   Of course I can use a new IP adress (the easiest way), but... I want to know how to remove a fixed IP adress when the associated client isn't accessible (the smart way).    Thanks (again...)   LD   ... View more

I have two ISP: WAN1 and WAN2   I would like to send all activity from my SONOS system through WAN2. So I configured:   192.168.128.87 is the fixed IP of the SONOS Bridge in my system.  Looking at the "Live Usage" in the Meraki App I see that all usage is still through WAN1   In the documentation I read:   Configure the preference similarly to the rule shown below. In this case, the Local IP range of 192.168.128.252/32 is the internal device referenced in a 1:1 NAT rule, and the Preferred uplink is the one using the public IP reference in the same rule.   But here I cannot follow any more, as I am not an IT professional (Home use of Meraki System)...  Do I still have to make a 1:1 NAT rule (or Layer 3 Firewall ?). Can You please give me an example.....   Help very appreciated, and Many thanks in advance !!!!   LD         ... View more

I 've created a Client VPN for connecting to my MX65W when I am out which works fine.   But when I look in the dashboard under Security Appliance / VPN Status I get no information. in the Firewall outbound rules I've set UDP Port 9350 open in the VPN Subnet.   In the App I get the information "This application is unable to connect to VPN registers using outbound UDP port 9350"   Or doesn't  Client VPN support VPN Registry ?    As I am not an IT professional, any help is welcome.   Many thanks, LD   ... View more

As mentioned before, I'm also interested in using SM for private (family) use.  So today I started my Free 30 days trial.     My question is: are all the functions available for every system?  My setup us: MX65W - MR30H and MS220-8 switch. Tried this, in a new profile:  https://documentation.meraki.com/SM/Other_Topics/Using_Fast_Lane_with_Systems_Manager Click + Add Settings and select WiFi to create a wireless payload. But I do not have the Wifi symbol, only "Restrictions" and "More iOS"    Second question, is the price of SM affordable for private use ?   Many thanks, LD ... View more