Meraki

Aousien · ‎Jul 18 2021

Thanks

Aousien · ‎Jul 15 2021

Thank you Kumar, in your screenshot you are using the same custom policy for the two peers, what if the two peers need two different sets of policies? can I say custom-1 and use it for peer 1 and custom-2 policy and use it for peer 2 ?

Aousien · ‎Jul 15 2021

Hello folks, is it possible to create a new custom IPsec policy for non meraki vpn peer, other than the ones that are predefined in the dashboard? I know we can update the setting and we have the custom one, but can we like have custom 1 and custom 2 to use for two different peers ? Thanks

Aousien · ‎Jul 15 2021

Hi Philip, is there any course you would recommend for network engineers to get familiar with Python? at least to be able to read and understand a code, and do minor fixes if the code through some errors. Many thanks. @PhilipDAth

Aousien · ‎Jul 14 2021

Hello All, Just wondering if there is a Meraki equivalent to Cisco's WLC QoS Levels Platinum, Gold, Silver, Bronze in the SSID configuration, otherwise what's the best way and best practice to have the corporate SSID with a higher QoS priority than the Guest SSID?

Aousien · ‎Oct 27 2020

Hi Brunce, thank you for the reply when I applied the group policy to the P2P link on the MX it did NOT affect the actual subnets, I think by doing that it will only apply if the source IP is from the P2P link which is not.

Aousien · ‎Oct 27 2020

Thank you, George, So I have LAN Subnets and SVIs configured on the core switch and not on the MX, how can I apply the group policy that has umbrella to those VLANs ? or do I have to move the L3 interface of the subnets to be on the MX to be able to use Umbrella? the network is something like below. ==Core with VLANs SVIs === /30 P2P link === MX ==== Internet

Aousien · ‎Oct 27 2020

Hi Folks, I am doing integration between Meraki MX and Umbrella, I don't have the VLANs/Subnets configured the MX, the subnets are configured on a core switch, and the MX has static routes to those subnets, the question is , How can I apply a group Policy with Umbrella to all traffic passing through the MX, if the subnets were on the MX it's easy, but not sure how to do it when the subnets are on the core and not the MX. thanks in advance.

Aousien · ‎Apr 5 2019

Hi, is there any validated design for having two vMXs in Azure as redundant VPN hubs, the only document on the website is for single MX, but incase of two MXs in different azure regions , how can we handle the route preference ? Thanks

Aousien · ‎Apr 5 2019

@fraya where you are able to get a working solution ?

Aousien · ‎Apr 5 2019

what's the best way to configure the returned traffic in Azure ?

Meraki

Community

About Aousien

Aousien

Community Record

Badges

Re: Custom IPsec policies with Site-to-site VPN

Re: Custom IPsec policies with Site-to-site VPN

Custom IPsec policies with Site-to-site VPN

Re: MERAKI BACKUP AND RESTORE

Meraki SSID QoS

Re: MX and Umbrella Integration when L3 subnets are on the core and not the...

Re: MX and Umbrella Integration when L3 subnets are on the core and not the...

MX and Umbrella Integration when L3 subnets are on the core and not the MX

SD-WAN two vMX as vpn hub in Azure

Re: vMX100 in Azure queries

Re: vMX100 in Azure queries