Looking for some advice/confirmation of my understanding on some network issues I'm having. (New IT admin here for a small office). Current setup: ISP -> Cisco Network Switch (owned by building) -> MX65W (ours) -> GS110-24 (ours) -> GR 10 Meraki Go APs (ours, 3 of them) Wireless printer is connected to wifi network broadcast from MX65W Devices unable to print to that printer if connected via network broadcast from one of the APs, can only do so if connection to wifi network on MX65W is established. Is it possible to configure so all devices are on the same network and can print? Can I get the Meraki Go APs to broadcast the network that the MX device is broadcasting? Or do the different product lines MX (M series) vs the GS and GR (G Series) prevent this? Thanks in advance.
... View more
Hello, Looking for some advice/guidance. Have taken over a small wifi network for office, configured as follows: Model GS110-24 network switch with 3 Meraki Go GR10 WAPs connected. Two wifi networks broadcasted from each WAP. We've experienced some random, spotty performance (general slowdowns, downloads taking 10-20 seconds to start...) as well as the network dropping completely now and again. Doesn't *seem* to be related to one particular wifi network, nor does it seem related to any building wide issues as it's isolated just to our offices. Any suggestions on troubleshooting? (haven't had much of a chance to do much as of yet). Also any recommendations on network monitoring tools that might help me track poor performance/outages, and hopefully isolate the cause (as well as just general ongoing network monitoring)? Thanks in advance.
... View more