Meraki

spaladug

@cmr Thank you for taking the time to share your feedback and the many others that chimed in too on that thread. Glad I could help make a difference on many of those and still following up on a few more of them 🙂 Appreciate everyone's willingness to share feedback and help each other. It is very valuable feedback that we at Cisco enjoy hearing.

spaladug

@Dunky Good news is that engineering pushed out the fix today and I have confirmed it is resolved now.

spaladug

Thanks @Dunky for sharing this. I've raised this with engineering.

spaladug

Thanks @Dunky for sharing this. I've raised this with engineering.

spaladug

@Dunky Engineering just pushed out the fix for this today and I've confirmed it is resolved now. Attached pic for reference.

spaladug

@Dunky Got good news to share. Engineering pushed out the fix just now. I am able to confirm it is resolved on my side.

spaladug

@Dunky Can you direct message me some of those examples so I can look into how we can improve in the future?

spaladug

Thanks @Dunky for letting us know. I am able to reproduce it and we will look into fixing it.

spaladug

@Dunky The fix was pushed out just now and I've confirmed the issue is resolved. Thanks for bringing this to our attention.

spaladug

@Dunky this was resolved on Jan 14th.

spaladug

@cmr I've brought all the above issues up to engineering soon after you started the thread and its just a matter of prioritizing them. Thanks again for sharing all those.

spaladug

Thanks for raising this issue @JGill. I raised this with engineering yesterday and it is now fixed.

spaladug · ‎Dec 15 2025

@RaphaelL if a port is selected then the non-selected ports will be lighter and the colors will be different than the legend. That looks to be the case based on your screenshot. If you do not select any port then the colors should match up with the legend. Can you confirm that?

spaladug · ‎Dec 15 2025

@cmr we are aware of the issue and a fix is being worked on. Please open a support case and we can notify you as soon as it is resolved.

spaladug · ‎Nov 30 2025

Thanks @BlakeRichardson for confirming that you are experiencing the issue on Safari. Along with investigating the issue the engineering team will look to see how this was not caught earlier. Once you open the support case please DM me the support case number and I'll monitor it.

spaladug · ‎Nov 26 2025

Hi @BlakeRichardson . I am not able to reproduce this issue with the new version of the SM devices page in Chrome but am able to see it significantly slower in Safari when doing the same search. Are you using Safari? Please open a support case so we can look into what is happening and for us to keep you in the loop on the status of fixing the issue.

spaladug · ‎Oct 27 2025

@RWelch thanks for noticing so quickly. We just deployed the fix and let me know is the issue is not resolved.

spaladug · ‎Oct 24 2025

Sorry for the delay as we had to spend a little more time on the fix. Engineering will be deploying the fix on Monday.

spaladug · ‎Oct 15 2025

Engineering is going to deploy the fix in the next few days. I'll update this thread once it is deployed.

spaladug · ‎Oct 13 2025

@Joel07 @Cryptopher @NetworkGuy841 @remixedcat @cmr @ZachE768 @UARiT @hadshaw21 @r2kat @Red-Five Here is the response from another dark mode thread.

spaladug · ‎Oct 7 2025

Hi @pokemaster. This thread is about an upgrade we are doing to Meraki Cloud Infrastructure as part of Meraki Cloud Infrastructure PCI compliance which is different than PCI compliance of a Meraki network on the customer side. Please open a Meraki Support case for us to look into that for you.

spaladug · ‎Oct 1 2025

We just now posted to the Meraki Status page after some initial investigation.

spaladug · ‎Oct 1 2025

@RaphaelL Thanks for bringing this up. I was able to reproduce this internally and notified engineering. They have root caused the issue and are working on a fix.

spaladug · ‎Sep 2 2025

Thank you @Slayton for confirming that resolved your issue. We will work on architecting those pages to gracefully handle no response from Launch Darkly so it does not need to be allowed by upstream firewalls.

spaladug · ‎Aug 29 2025

@BMitch @Slayton @Holli69 can you please allow traffic to app.launchdarkly.com on your business network and let me know if that resolves the redirect looping on those pages when connected to the business network?

About spaladug

spaladug

Community Record

Badges