Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About GarageLand42
Community Record
10
Posts
0
Kudos
0
Solutions
Badges
Apr 29 2024
7:15 AM
We currently have 7 remote locations with a Meraki MX. In our Corporate Office we are using Cisco Umbrella. Devices at the Remote locations are getting the IP addresses of our Internal Umbrella DNS servers located in our corporate office. Should I Just add the API Key, and will it just propagate into the Umbrella cloud. Do I need to add the external IP of our remote sites. Do I also need to add the Internal IP address of remote site. How do I add my remote locations to protect them. Should I add the remote IP Networks to the Umbrella side 1st, ? Should I Enable remote Protection on the Meraki Side 1st using the API KEYs/Secret. Do I need additional licensing to protect my remote locations.
... View more
Dec 4 2023
12:20 PM
I am not on site and will be doing this remotely. We are looking to migrate away from 1 ISP currently connected to WAN 1, to a different ISP on Wan 2. If I convert port 2 from Lan to Wan , will this impact my Wan Port 1? My Wan port 1 is currently working and configured to a non-meraki VPN Peer Can I then configure the New Wan 2, and make that my primary uplink port.?
... View more
May 15 2023
8:08 AM
Great. Thanks. I inherited a Company where is was not configured correctly and I am not on site. I will ship a stacking cable to a smart user at that location and have them plug it in.
... View more
May 10 2023
2:21 PM
SW6 of my stack Broke and my remote tech just powered it down and shipped back to the home office and connected the stacks cables. Under the current members, do I remove it by clicking on Remove Switches. Are There any Gotcha.?
... View more
Mar 30 2023
11:32 AM
Our MX WAN 1 port currently has a /29 subnet mask, and is using one of the IP's. It is running the VLAN and DHCP for our internal network. I need to statically assign 1 of the available numbers from the WAN side so I can hook up one an internet facing server. The server cannot have access access to our internet network. Is this possible ? I wanna place a small switch bewtween the ISP and the MX, and connect my statically assign IP address server to that. switch. Existing Proposed Or is there a better way.
... View more
Dec 8 2022
12:31 PM
We have 2 ISP's WAN1 and WAN2. WAN1 is the Primary, WAN2 is the Secondary. All our internal devices are on the same vlan90. - Printers and PC's The Printers need telnet port 25 capability to blahblah.onmicrosoft.pro..... to send mail WAN1 doesn't allow port 25 while WAN2 does. Can I create a Flow Preferences , with the internal IP of the printer and destination of blahblah.mail.protect, peferered uplink WAN2
... View more
Nov 8 2022
1:56 PM
We are changing our ISP which is connected to WAN1. WAN1 currently has a static IP. Do I simply connect to the MGMT port and change the WAN IP to the new address. Nothing is changing on the inside network.
... View more
Nov 7 2022
1:06 PM
Does the MX60 running 14.56 support running IKEv2 ? This is going to connect to a Cisco 5516 where I already have IKEv2 setup and working with other S2S vpns.
... View more
© 2024 Cisco Systems, Inc.
