Meraki

AJ-Acevedo · ‎Jul 30 2019

As mentioned in my original post, I am aware I can manually update the SNMP string on each network manually. I’m looking for a way to bulk update all networks simultaneously.

AJ-Acevedo · ‎Jul 26 2019

I'm looking to update the SNMP v2c community string on all of the devices in an Organization spanning several networks. Is there a way to update SNMP across all networks? I can only find a way to update SNMP manually under each individual network. With dozens of networks under a single Organization this is a very tedious process. Hopefully there is an easier way. Thanks!

AJ-Acevedo · ‎Jul 8 2018

There's no shortcut if you want to allow OneDrive but block all of the other file sharing services. The official Microsoft article appears to align with what Meraki support is saying. https://support.office.com/en-ie/article/required-urls-and-ports-for-onedrive-ce15d2cc-52ef-42cd-b738-d9c6f9b03f3a

AJ-Acevedo · ‎Jun 11 2018

I too am receiving errors when running the script. Both on Organizations with and without devices on their network. See below. Python 3.6.5 requests 2.18.4 meraki 0.33 HTTP Status Code: 404 - No returned data Traceback (most recent call last): File "meraki-backup.py", line 159, in <module> write_admins(file,apikey, orgid, suppressprint); File "meraki-backup.py", line 53, in write_admins for row in myOrgAdmins: TypeError: 'NoneType' object is not iterable

AJ-Acevedo · ‎Jun 4 2018

@PhilipDAth Have you considered putting this script under version control on GitHub? Would be a great way to for people to track changes/updates and contribute to the code base.

AJ-Acevedo · ‎May 25 2018

Still no official backup or rollback solution?

AJ-Acevedo · ‎May 25 2018

In the photo the equipment is simply just sitting on a credenza. We use it for disaster scenarios where we need to deploy an emergency network at one of our satellite offices when all else fails or when we need to setup a temp network with little notice to get a circuit lit. We haven’t really consider a deep cell battery because we need the crash kit to be easily packed up into a bag and deployed. I image a deep cell car battery would easily give you over 24 hours of service. AJ

AJ-Acevedo · ‎May 25 2018

Indeed. Hence the name "Crash Kit".

AJ-Acevedo · ‎May 25 2018

In theory with the API you should be able to create backups of your config. No?

AJ-Acevedo · ‎May 25 2018

With WiFi enabled, and a few connected clients I'm only getting about four hours. With WiFi disabled I would anticipate getting more than double that. Most of the energy with WiFi enabled is wasted as heat.

AJ-Acevedo · ‎May 25 2018

Just thought I'd share this with the community. Here is our Meraki MX65W with two AT&T 5G ready cellular modems load balancing WAN1 & WAN 2 over Ethernet and a Verizon LTE USB modem for failover. Completely battery powered. The MX65W is running off of a 90W 27,000 mah battery and the LTE modems are running off of their internal 5000 mah battery connected to a 20,000 mah battery. Theoretical battery life 16 hours. Real world I expect under 10. Works great for an emergency scenario. We call it our Crash Kit.

AJ-Acevedo · ‎May 24 2018

I tried three different clients. iPhone, Windows 10 and macOS. I was able to confirm that the clients connect and we’re receiving the correct IP address, just no Internet. I haven’t tried SSID 1 again after I got it working on SSID 2. I’ll give it a shot and likely open a support case.

AJ-Acevedo · ‎May 24 2018

Meraki Wireless Health looks like a amazing insights tool for Wireless Access Points. Great reason to update the map of access point locations with floor plans if you haven’t already done so.

AJ-Acevedo · ‎May 24 2018

I ran into such a strange issues today. Wondering if anyone else experinced this. On an MX65W I was unable to get out to the Internet using SSID 1. I configured SSID 1 with WPA2 PSK and only allowed WPA 2. Default VLAN and firewalls rules allowing any outbound traffic from any device. Rebooting the device didtn’t help. I then used the exact same settings on SSID 2 and it worked just fine.

Meraki

Community

About AJ-Acevedo

AJ-Acevedo

Community Record

Badges

Re: Update SNMP Community String across all networks

Update SNMP Community String across all networks

Re: Onedrive Firewall Layer 3 - MX64

Re: MERAKI BACKUP AND RESTORE

Re: MERAKI BACKUP AND RESTORE

Re: Backup MX84

Re: MX65W - Portable and battery powered

Re: MX65W - Portable and battery powered

Re: why do i bother using your service??!!!!

Re: MX65W - Portable and battery powered

MX65W - Portable and battery powered

Re: Unable to get out over SSID 1

Re: Meraki Wireless Health is now available in beta!

Unable to get out over SSID 1

MX65W - Portable and battery powered

Re: Onedrive Firewall Layer 3 - MX64