Hey again everyone,   Working on this project, I'm very unfamiliar with how to set up the Meraki switches properly, literally have 0 experience before starting. So I apologize if this topic was posted already before, but my scenario seems specific to our environment. I have a Sonicwall switch that has given an IP to the Core switch (MS410-16) when I plug it in to get onto the internet. This is nice, but now that I'm connecting an LC to LC cable from the Core switch to an Edge switch (MS125-24P), I cannot get the port to light up or do anything. When I'm in the dashboard and click on the port, it recognizes that there's a transceiver and the brand of the transceiver. Physical connections wise, I believe I have it correct, just need some direction to what I should be configuring and how on the Core and Edge switches.   Thank you in advance for your help on this. ... View more

Hey everyone,   Was following this video on youtube: https://www.youtube.com/watch?v=IKDHnZzkJ8I And I'm having trouble with the switches to show up as a stack automatically on this page (as noted in the video link at timestamp 2:06):  Both switches are the same model, on the same firmware (14.33.1) and the stacking cables are identical. The cables are EQUAL brand, model: MA-CBL-40G-1M-EO I also have the cable from stackport 1 of the primary switch, going into stackport 2 of the secondary switch, and the second cable going into stackport 1 of the secondary switch, going into stackport 2 of the primary switch.   The port itself says it's "Disconnected". Any help in trying to get this physical stack to work would be super appreciative.   Thank you all in advance for your help and insights.   ... View more