Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About GoranP
Community Record
9
Posts
1
Kudos
1
Solution
Badges
Hello, For anyone who experience the similar problems, we get the response from Meraki support that this particular IP address is a server address used in Meraki cloud that relays any authentication request. We need to see why the response time is bad. Next step is to take packet capture and to send it to the support. Thanx to everyone who read this and tried to help us 🙂
... View more
I get response about that address from support and they think address is from google radius. But i got the same error with the same ip address from another guest SSID configured as "enterprise with Meraki cloud authentication".
... View more
Hello, Yesterday i disabled 802.11w and Band steering and changed to 40Mhz. I will also check NIC driver and wait to see how its going to be today. Does anybody know what is address of a radius server from the first screenshot ?
... View more
Thanx for the reply, Our security policy request that we have hidden SSID. Wireless configuration are deployed to the Win and Mac Clients via MDM polices. So the user just need to connect to the wifi already configured and enter app pass. We also have guest wifi that is not hidden and with security settings configured as "enterprise with Meraki cloud authentication" and we get the exactly same errors.
... View more
Hello, We have a problem with our wifi network for about a month. Users get randomly disconnected and sometimes is needed more than 10 times to rejoin the network. We are using as security settings "enterprise with google" and authenticate to the SSID with google email and created app password. Usually we encounter this tape of error: We do not have radius server and have ipv6 bridging disabled in Meraki options. What is that address that standing here as a address of a radius server ??? I try to ping that address from any AP and its responsive. From the event log we usually get something like this: I will upload screenshot of my configuration here and i will gladly add more if it is needed. Access Control: RF Spectrum: Radio Settings: If anyone has any suggestions or has experienced a similar problem, I would appreciate help. Also, if additional information is needed, I'm here. Thanks in advance for your time.
... View more
Apr 27 2022
1:14 PM
1 Kudo
Hello ! I did it successfully. (i make vlan on the firewall and delete switch vlan interface on stack, after that i regain connection with my devices) Thank you for your help.
... View more
Apr 27 2022
7:06 AM
Thank you for fast response 🙂 I will try that after working hours. I will report the end results 🙂
... View more
Apr 27 2022
6:10 AM
Hello, I also tried something similar, created subinterfaces on Palo Alto interface for networks 192.168.0.0 and 192.168.3.0 but i left switch vlan interface up. How to dawngrade to vlan 2, dont have option to just create vlan on layer 2 ? Is it enough to just delete switch vlan interface on stack and provide IP address form subnet 192.168.3.0 with default gate 192.168.3.1 and vlan 3 to Meraki devices? (in that case i would set subinterface on the firewall IP 192.168.3.1)
... View more
Apr 27 2022
5:49 AM
Hello to everyone, Im engaged from my employ to do some advanced configuration on existing network. Im completely new to Meraki but have some expirience doing network administration. I have problem with vlan configuration. network: Palo Alto firewall 2 x MS425-16 in stack 5 x MS225-48 10 x MR56 Admins before me configured entire network in vlan 1 (servers, clients, meraki management IP...) and that is work fine. On stack is created switch vlan interface in default vlan 1 192.168.0.29 and global default route is 0.0.0.0/0 -> 192.168.0.1 (that is address of palo alto interface) The idea is to make more separate vlans like Guest, Users, Servers, Device Management with different subnets I created Guest switch vlan 20 interface on stack 192.168.20.1/24 with dhcp relay in 192.168.0.0 network where is server, and that is work fine. I wonted to make Management vlan for all Meraki devices in subnet 192.168.3.0 and i created switch vlan 3 interface on stack 192.168.3.1/24 after i change the ip address of all Meraki devices to appropriate IP address for examle 192.168.3.10 with default gateway 192.168.3.1 and put it in vlan 3 After i do that 15 of my devices resume working just fine but i lose connectivity with my core switches. (2 x MS425-16 in stack) I tried changing management vlan to vlan 3 in /switch/switch settings/vlan configuration option and did not help.. both switches are pingable from devices in the new vlan 3 but they are unreachable from dashboard and from any other device. After 2 hours they come back online with old configuration. (have some different trials where i again lose connectivity for 2h) I hope i provide enough information about the problem, if there is any information that i can provide i would do it. Thanx in advance.
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 2665 | Nov 4 2022 6:51 AM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 1 | 2455 |
© 2024 Cisco Systems, Inc.
