Hey, db-18, I'm currently struggling with the exact same situation and was wondering if you had success with this setup? ... View more

We ended up removing the MX84 from service but good to know this is resolved. We were told by Meraki that this was expected behavior and would never be resolved. Thank you for letting me know! ... View more

      Want to Have Internet failover so if Site B's Cable Modem goes down, the Internet Connection can be routed through Site A using a 1GB Point To Point Fiber L2 Connection. I've read above solution on how to accomplish this using a LAN Connection on Site A to the WAN Connection on Site B I have Qnap's on both ends that I want to Synchronize (Rsync) at night after Backups complete, but will easily be instantly capped on the 500MBps limit on the MX84 at the backup site. Would like to see if there is an alternate way to accomplish this so I can take advantage of the full 1GB link on the PTP connection using only LAN ports on the MX's. ... View more

Right. I amended my reply above for a VPLS (or other layer 2 MPLS service). In that case you're right and it's the same layer 2 domain on both sides. ... View more