Meraki

MarcP · ‎May 6 2022

Multiple Solutions would be something, as well. Or the posibility to chose two as a solution, as there can be more than one way a good one.

cmr · ‎May 4 2022

As an update the FS module shown above is unlikely to work as it relies on the switch supporting the 1x40Gb -> 4x10Gb splitting mode breakout cables. This is not supported on MS355s or any other Meraki switch apart from perhaps the MS390 as that is a Cisco 9300 and it would work on one of those.

MeredithW · ‎Apr 29 2022

UPDATE: this contest has ended. We really enjoyed reading everyone's innovative ways to save the planet, so thanks for all of your submissions! Our randomly selected winners are: @peterk, @ROCTEL, and @Dieghitoo77. Congrats!

Techy1256 · ‎Apr 29 2022

Thank you for the suggestions. Turns out there's problem with on-site cabling. When the AP's are connected directly to the switch with an alternative cable they work as expected

张起东 · ‎Apr 27 2022

It depends on whether the LIC license of your control panel is co-term or PDL. In the case of co-term, if one device does not activate LIC after you add all the devices, then your organization will enter a 30-day grace period. If you do not activate LIC for the remaining devices within the 30-day grace period, All devices within the organization will be disabled. If the control panel is in PDL state, LIC is for each device and does not affect the organizational level, so even if one device does not activate LIC, it does not affect other devices.

FelipePerrone · ‎Apr 25 2022

Hola @WladimirMendoza ! Aunque la Z3C podería disponibilizar internet wi-fi y cableada, es un equipo con enfoque en teletrabajo y soporta pocos clientes conectados (es más para uso personal). Mi recomendación para la conectividade a multiples usuários sería: - un gateway celular MG, que tiene un modem 4G integrado con hasta 2 rañuras nano SIM y 2 salidas ethernet - una MV para la solución de cámaras, donde utilizaria un power injector para energia y 1 de las conexiones ethernet del MG - un MR dedicado para disponibilizar la conexión wi-fi, conectado a la otra conexión ethernet que tiene el MG Si necesitan una solución para soportar factores del clima, aún recomendaria la utilización de la MV y el MR de uso al exterior por la classificación IP67 que tienen (el MG ya lo tiene en todos los modelos). Les recomendaria buscar un representante de ventas Meraki también, solo para validar algunos puntos del proyecto. Saludos

张起东 · ‎Apr 24 2022

nice

张起东 · ‎Apr 24 2022

nice

张起东 · ‎Apr 24 2022

QOSは手動で設定でき、デフォルトのQOSを使用せずに設定できる。

张起东 · ‎Apr 23 2022

For MS series switches, you need to purchase LIC separately, and the LIC model corresponds to the MS switch model. At the same time, you need to purchase a separate power cable. The power cable model varies according to the country. If you do not buy a power cable, CCW will not report any errors. For example, if you want to order the ms210-24p-hw, then you need to buy another counterpart to the lic-ms210-24p-xy (X=1,3,5,7,10), and finally add a power cable.

Meraki

Community

About 张起东

张起东

qidong zhang

Community Record

Badges

Re: [CONTEST CLOSED] Share your feedback and snag some swag!

Re: QSFP & SFP28

Re: [CONTEST CLOSED] Happy Earth Day!

Re: MR44's not broadcasting SSID's

Re: MX 67 licensing

Re: Meraki para Vehículos y buses

Re: VPN Registry Disconnected But Can Be Pinged - HA MXs with VIP

Re: Cisco Champion Radio: S9|E8 What's Next with Wi-Fi6E?

Re: MS配下の端末でuplink 1G/downlink 100Mになる

Re: Meraki MS

Re: QSFP & SFP28

Re: MS配下の端末でuplink 1G/downlink 100Mになる

Re: Share your feedback and snag some swag!

Re: QSFP & SFP28

Re: MX 67 licensing

Re: Meraki MS

Re: Happy Earth Day!