I've a S2S with Azure VPN gateway working fine with static routing I just installed now the beta MX 19.1.4 that states to support VPN BGP routing.   I've followed the documentation https://documentation.meraki.com/MX/Site-to-site_VPN/BGP_routing_over_IPsec_VPN But the confusing part is the IPsec /30 subnet. This is not something that seems not to work properly. With an example: Configured on Meraki the S2S VPN tunnel BGP with IPsec subnet:192.168.8.0/30, BGP source IP:192.168.8.1, BGP neighbor IP192.168.8.2 The the Azure VPN gateway BGP peer is an address from the Azure subnet: 192.168.5.13 The AzureGW S2S connection is pointing to the 192.168.8.1   From a network trace on Azure, I can see the BPG traffic getting no response/retry on both directions from Meraki MX: 192.168.8.1 to 192.168.8.2 from Azure VnetGW: 192.168.5.13 to 192.168.8.1   Is this supported somehow? ... View more