A few weeks ago, we disabled our perimeter firewall rules that allow our MX68 to communicate with the Meraki dashboard. This was done intentionally as part of planned maintenance. We have left the rules disabled.   However, it appears that the MX68 is rebooting periodically. I can't confirm this yet because I'm remote, but would the MX68 do some "panic" and reboot if it was unable to communicate with the dashboard? ... View more

After a power outage or an internet provider outage at my house, the Z3 teleworker appliance does not re-establish the VPN tunnel with our MX68 appliance in our data center. There seems to be no issue with the Z3 communicating with the Meraki dashboard, but the VPN tunnel does not re-establish. I appeared to have an outage at my home overnight last night that recovered at approximately 1:15am EST. Since that time, I can see the MX68 continually attempting to communicate with the Z3 (via our firewall logs), but there seemed to be no response from the Z3 - thus, the VPN did not re-establish. Are there logs on the Z3 or MX68 that I can view to determine why this happened? ... View more

Just today, I saw our Z3C Teleworker gateway trying to hit 208.67.220.220 on TCP 443, which is being blocked by our firewall. Our firewall (Palo Alto) identified the application as "dnscrypt". A screen shot is attached.   Is this traffic a new requirement for the Z3C?       ... View more