Yes, the per-port VLAN settings are the settings on each port on the MX105. As you can see all the MX ports are set as trunks (so they carry multiple VLANs), with a Native VLAN of 1, and all VLANs allowed. To get you up and running these are the same settings that you should use on all the connections between MX and MS, MS and MS, and MS and MR. ... View more

Ok you both convinced me then 🙂 I will give it a go on the MX105 and see how far I can get with trying to configure the VLANs.      Thanks again. ... View more