Hi, everythnig works fine. These are results from my network   C:\Users\xxxx>nslookup gmail.com Server: UnKnown Address: 192.168.1.1 Non-authoritative answer: DNS request timed out. timeout was 2 seconds. Name: gmail.com Address: 142.250.180.197 C:\Users\xxxx>nslookup google.com Server: UnKnown Address: 192.168.1.1 Non-authoritative answer: DNS request timed out. timeout was 2 seconds. Name: google.com Address: 142.250.201.206 C:\Users\xxxx>nslookup youtube.com Server: UnKnown Address: 192.168.1.1 Non-authoritative answer: DNS request timed out. timeout was 2 seconds. Name: youtube.com Address: 142.250.180.206     C:\Users\xxxx>ping gmail.com Pinging gmail.com [142.250.180.197] with 32 bytes of data: Reply from 142.250.180.197: bytes=32 time=32ms TTL=111 Ping statistics for 142.250.180.197: Packets: Sent = 1, Received = 1, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 32ms, Maximum = 32ms, Average = 32ms Control-C ^C C:\Users\xxxx>ping youtube.com Pinging youtube.com [142.250.201.206] with 32 bytes of data: Reply from 142.250.201.206: bytes=32 time=32ms TTL=53 Ping statistics for 142.250.201.206: Packets: Sent = 1, Received = 1, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 32ms, Maximum = 32ms, Average = 32ms Control-C ^C C:\Users\xxxx> ... View more

I'm just wandering if you clients network (home network) is the same subnet like your server net 192.168.0.0/24? If it is it could be a problem. ... View more

Hi @Ranel_Laroco , could you confirm that both VPN clients work correctly in the situation when is only one active? Next what I'd be do is to when connect use one or other VPN client, take of routes which a VPN server provides to VPN client (I mean which networks will be protected with VPN tunnel). example Cisco AnyConnect Per picture only networks: 192.168.1.0/24, 192.168.10.0/24,192.168.100.0/24, 192.168.200.0/24, 192.168.1.4/32 are protected I just use two VPN clients: Cisco AnyConnect and PulseSecure at the same time ... View more

If I understood well your network design is like on picture:                     By my experience you can have two different VPN clients (I have Cisco Anyconnect and Watchguard, or AnyConnect and PulseSecure). It works. But every connection profile has split tunneling enabled on VPN server, LANs on server's side are different subnets, VPN ip pools are different and neither VPN servers push the same subnets as on the other Site. It should work. ... View more

Congrats Meraki Community!!! I wish you Many years of successful journey!!🎉 ... View more

If you got public IP subnet for link as /30 subnet and the rest of you public IP address is pool /24 subnet Than you can just add that subnet to inside part (interface) to the rest of your network. In this case a ISP has route to this /24 pool of these public addresses via /30 subnet. You can use the rest of your pool as you want. Use it as the whole /24 subnet or divide it in smaller chunks of subnets for example 2x/25 sunets or 4x/26 subnets  etc.. M ... View more

Hi, did you try ip nat overload feature? Maybe this link will help you. https://documentation.meraki.com/MX/NAT_and_Port_Forwarding/Port_Forwarding_and_NAT_Rules_on_the_MX M ... View more