In our case, the site didn't have an MX, so that wasn't the issue. ... View more

Basically what the text informs is that when I create a rule specifying the priority as High it will have a higher priority than the default rule, that is, what will come into effect is the DSCP configured in the rule marked as High and not what is defined by default, but that's ok, the important thing is that the doubt was clarified and everyone is so happy. 😀 ... View more

Hi WW. I did come across this article earlier in the week and we did try to specify the domain name on the copier but that did not work. It seems like Marc may have got lucky in that article. ... View more

Figured it out. The switches I was passing vlan 10 on weren't actually trunked directly (this is a remote location). I did a sh cdp neighbor and realized which switches were connected to each other. I added vlan 10 to all switches to pass that traffic and all servers came up. ... View more

Thank you Bruce. We're currently using VTP transparent mode on all switches so it should be as simple as adding the Wireless VLAN to all switches. We're also not restricting any VLAN's on the trunk ports between switches.   I plan to change the config in the office which has the AP's setup as trunk ports and turn them into access ports. This way we can keep a standard going forward as we currently use access ports for our Aruba AP's. ... View more