Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About Cakes
Cakes
Here to help
Member since Jun 15, 2021
yesterday
Community Record
7
Posts
1
Kudos
0
Solutions
Badges
Hi, currently experiencing the same issue with (19) MS390-48UX2 and (2) MS390-24UX switches. All these switches are operating normally but consistantly display under Firmware (Up to date, Current Version: Not running the configured version). All switches were at firmware 16.8 so I updated the to version 16.9 in hopes of fixing this bug. Nothing has changed with the update. Switches rebooted and seem to running normally. I will be opening a ticket with support.
... View more
Apr 21 2023
12:49 PM
I have been on the 18.106 firmware for some time now, although I see 18.107 is available now. I'm working with my ISP and provided a packet capture just filtering the ARP. But now I'm thinking of including ICMP, ARP and DNS to get a better view.
... View more
Apr 21 2023
12:39 PM
I connect to a switch then to the MX. I haven't tried changing the network cables. I have tried rebooting the entire switch.
... View more
Apr 21 2023
12:31 PM
My WAN1 and WAN2 uplink keep switching back and forth. For unknown reasons the uplink goes into failover mode and switches from the primary uplink to the secondary uplink. I have been on phone with my ISP monitoring our ONT and there are zero dropped connections. Of course, the amazing Event log that Meraki provides us shows zero detail concerning why the primary uplink status has changed. I know the MX performs failover connectivity tests to determine uplink status and it's possible it's failing one of these tests. But since there is no detail for this event in the so-called event log. How am I able to diagnose that one of these test failures is the possible root cause of the problem?
... View more
Labels:
- Labels:
-
Other
Jun 21 2022
6:52 AM
1 Kudo
I agree @JohnT this is completely unacceptable. I am in the process of working directly with Meraki's Development Team to get this code available to me and then in the next firmware update. I have worked with FortiGate, SonicWall, FirePower, ASA, pfSense and many other competing products. All of them have the ability to do source NAT. The MX250 is an "Enterprise" class firewall and it's lacking this feature.......this should not be labeled Enterprise class.
... View more
Jun 17 2022
11:08 AM
If you don't mind me asking @cmr what are you using for you enterprise edge solution? Like I said Meraki tech support told me to throw a switch between our firewall and our ONT. The only problem is I know very few switches that will NAT.
... View more
Jun 17 2022
7:06 AM
I'm in the process of converting my firewall from a Fortigate to the MX250. I have 16 public IP address available from my ISP. The WAN 1 uplink has one public IP and I have five 1:1 NAT forwards to various servers so no problem there. The problem is I need to route outbound traffic from different VLANS via different public IP's We are a eduction institution and use a web filtering service that monitors certain public IP's we have to direct web traffic to specific filtering policies. I've talked with Meraki tech support and according to them all I can do is place a switch between my ONT and the MX250. Then program the other WAN uplink with one of the public IP's. But this does not solve my problem as I still have three other VLAN's that route outbound using other public IP's. My Fortigate allowed me route any traffic outbound to whatever public IP I wanted it to have. Any ideas how to do this on the MX250?
... View more
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 1 | 2493 |
© 2024 Cisco Systems, Inc.
