My WAN1 and WAN2 uplink keep switching back and forth. For unknown reasons the uplink goes into failover mode and switches from the primary uplink to the secondary uplink. I have been on phone with my ISP monitoring our ONT and there are zero dropped connections. Of course, the amazing Event log that Meraki provides us shows zero detail concerning why the primary uplink status has changed. I know the MX performs failover connectivity tests to determine uplink status and it's possible it's failing one of these tests. But since there is no detail for this event in the so-called event log. How am I able to diagnose that one of these test failures is the possible root cause of the problem? ... View more

I'm in the process of converting my firewall from a Fortigate to the MX250. I have 16 public IP address available from my ISP. The WAN 1 uplink has one public IP and I have five 1:1 NAT forwards to various servers so no problem there. The problem is I need to route outbound traffic from different VLANS via different public IP's We are a eduction institution and use a web filtering service that monitors certain public IP's we have to direct web traffic to specific filtering policies. I've talked with Meraki tech support and according to them all I can do is place a switch between my ONT and the MX250. Then program the other WAN uplink with one of the public IP's. But this does not solve my problem as I still have three other VLAN's that route outbound using other public IP's. My Fortigate allowed me route any traffic outbound to whatever public IP I wanted it to have. Any ideas how to do this on the MX250? ... View more