Meraki

eddiex · ‎May 4 2021

Thank you for checking!

eddiex · ‎May 4 2021

Thank you for checking that out!

eddiex · ‎May 4 2021

I would say about 1,000 devices.

eddiex · ‎May 4 2021

Current environment Cisco 6509E as core and the rest are running as L2 distribution/access switch. 1*6509E 7*4506E 2*MS425 5*MS350 10*MS250 5*MS125 All Meraki switches are running on firmware 11.27. Support technician recommend me to upgrade to the latest stable version which is 12.28.1. After review the release notes, I see the known issue of MS425 stacks directly exposed to large L2 domains can experience stability reduction. I am wondering what consider as "large L2 domains"? Thank you everyone.

eddiex · ‎May 4 2021

Thank you very much for the clarification. The branch office does use 10M ISP for everything. All branch traffic(internet and corp data) go back to the VPN tunnel back to main office. So, if the branch office need go to Google, it will first tunnel back to main office, and then go out to the internet through the main office's firewall. Like full tunneling. In this case, will QoS makes any impact? Thanks

eddiex · ‎May 4 2021

Thank you very much for the clarification. The branch office does use 10M ISP for everything. All branch traffic(internet and corp data) go back to the VPN tunnel back to main office. So, if the branch office need go to Google, it will first tunnel back to main office, and then go out to the internet through the main office's firewall. Like full tunneling. In this case, will QoS makes any impact?

eddiex · ‎May 3 2021

Hello, I am working on a project that connects our branch office back to main company building via site to site VPN by PaloAlto firewall. All branch office traffic goes through the VPN. The branch office has a very slow internet connection (10M), so QoS is important for VoIP. Current setup. Main company (ISP 1G uplink) PaloAlto firewall Cisco 6509E as core Meraki MS350s+MS250s Phone servers Branch office (ISP 10M uplink) PaloAlto firewall to do site to site VPN Meraki MS125 IP phones I am wondering whether the QoS should be setup on my Meraki MS or the PaloAlto firewall. Thank you everyone.

Meraki

Community

About eddiex

eddiex

Community Record

Badges

Re: Known Issues: MS425 stacks directly exposed to large L2 domains can exp...

Re: Known Issues: MS425 stacks directly exposed to large L2 domains can exp...

Re: Known Issues: MS425 stacks directly exposed to large L2 domains can exp...

Known Issues: MS425 stacks directly exposed to large L2 domains can experie...

Re: QoS for slow ISP connection

Re: QoS for slow ISP connection

QoS for slow ISP connection