Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About Riser
Riser
Getting noticed
Member since Mar 20, 2021
Oct 3 2024
Community Record
54
Posts
4
Kudos
0
Solutions
Badges
Aug 15 2023
4:24 PM
The reason why I didn't want to move with the option is that the same network has 3 MS225, which we will be retaining. Cloning the entire network will mean cloning the same settings for the 3 switches, which will still be retained, right?
... View more
Aug 15 2023
3:15 PM
We are looking at switching from MS220-48FP to MS120-48FP. Currently, we have 8 MS220-48FP on our network. Is there an easy way to effect this change and move all the settings at once from the existing 8 MS220-48FP to the new 8 MS120-48FP? Of course, it will take time to configure all the port settings individually. Any suggestions will be appreciated.
... View more
Dec 6 2022
10:22 PM
We are looking at having VPN access via SAML with Okta on the Meraki firewall. Do we need the Cisco AnyConnect VPN-only license or do we need to have the "premier License" for AnyConnect?
... View more
Nov 16 2022
7:19 AM
Hello All, AT&T is installing a backup internet for us. It is a 50Mbps BU / Fiber S14. This requires an SFP port on the Meraki to connect it to. We are using an MX84 which I don't think allows SFP for WAN interfaces. What should we do? Any advice?
... View more
Labels:
- Labels:
-
Firewall
Nov 6 2022
8:58 AM
I recently installed systems manager on 2 Ipads as supervised devices, but still, the end user has to accept any apps to be installed. how do I silently push out apps without the user having to hit install?
... View more
Nov 2 2022
6:55 AM
Say I have a 2GB link. what is recommended? The SFP goes to 1GB and SFP+ needs 10GB.
... View more
Nov 1 2022
1:55 PM
If we actually purchase the MX105 with the SFP+ Modules, will that work with our current 1GB connection or the connection has to be over 1GB?
... View more
Nov 1 2022
1:54 PM
If we actually purchase the MX105 with the SFP+ Modules, will that work with our current 1GB connection ?
... View more
Oct 31 2022
12:26 PM
We are procuring an MX105 that supports SFP+. Do we need to purchase SFP+ modules, or will our current SFP modules still work(Were working on our MX85)?
... View more
Jul 7 2022
10:09 AM
Hi guys, Does anyone know if we can already add the new cisco APs (9162,9164,9166) to the Meraki dashboard? If yes, anyone who has come across the documentation? Thank you.
... View more
Jun 30 2022
3:05 AM
@ww thanks for your response. The documentation talks about the fiber cables which I mentioned that we are using SMF. We are stuck on the Fiber patch panels and cables.
... View more
Jun 30 2022
2:23 AM
We are preparing all the accessories we require in order to install and interconnect the Meraki switches. We have cat 6e Ethernet cables. What fiber patch panels should we purchase? We are using single-mode fiber cables. What sort of fiber patch cables do we need? OS2 SM or OM3 or OM4? LC-LC or LC-SC or SC-SC? Simplex or duplex?
... View more
Jun 26 2022
3:29 AM
@PhilipDAth thank you. I'm meant to understand that there is a formula for calculating this. I'm trying to get that too.
... View more
Jun 26 2022
12:50 AM
Just curious to know what happens when Meraki's air marshal contains a malicious SSID. We are planning to use it in our office. Will it disconnect the currently connected clients or only block others from connecting? because If it does disconnect, then we might lose important info. If it disconnects, will it disconnect users from the malicious SSID only or all other SSIDs?
... View more
Jun 25 2022
3:02 PM
Hi team, How do we know how many APs need to be deployed on the basis of client count? Say we have 500 users and a 30/70 split between 2.4 GHz and 5 GHz is used.
... View more
Jun 21 2022
11:25 PM
Hi, I am new to using the Cisco Catalyst switches. Have used the Meraki switches for some time though. So recently, an old client has procured 3 C9300-48P-E Catalyst switches and wants them enabled for cloud monitoring via the Meraki dashboard/ or rather to onboard them to the dashboard. I am very green on this. Never interacted with the Cisco IOS-XE before. Will I need to have physical access to the switches to take them through this? Where should I start from? Do they need to do any pre-configurations on the switches? The bummer is we are in different countries and I can't physically access the switches and they don't have any IT literate staff with them. Thanks for helping IA.
... View more
Jun 21 2022
11:05 PM
@BlakeRichardson thank you for the update. I will consider this.
... View more
Jun 20 2022
11:32 PM
Hi Ucert, Thanks for your prompt response. Do you know if it's possible to combine 2 power supplies on the MS switches to ensure redundancy in case of an outage? I'm looking at having one power cable go directly to a switch from the main circuit and the second power cable go through a UPS.
... View more
Jun 20 2022
10:11 PM
Hi All, We are looking at purchasing the below MS switches; 8x MS425-16 9x MS225-48LP 2x MS350-24X Anyone who would recommend good UPS units for me? Do the switches come with a single power supply, or are there redundant power supplies? Currently, I am assuming we have a single power supply = 480W peak power consumption.
... View more
Jun 19 2022
7:14 AM
1 Kudo
Hi all, Assuming that I have 2 networks, Network A, & C. There is a full VPN tunnel from Network A to Network C. How many MI licenses will I need to configure on Network A to gain web app health visibility on Network C? Do I need a license on both networks, A & C, or only a single license on network A?
... View more
Jun 16 2022
10:29 PM
We have an issue that we have been arguing about with my peers on what information is shared between the MXs firewall in the High Availability Pair. We are torn between 2 choices, the spanning-tree state, and the stateful firewall database. Some say the Spanning tree state but I say the stateful firewall database and gave the below explanation, am I correct, or anyone who can suggest differently? Explanation: The MXs in a High Availability pair share the stateful firewall database, which is used to allow the firewall to retain information about its rules and the addresses on which it has been configured. The spanning-tree state is not shared between MXs because it changes as the network topology changes, and High Availability requires that the same topology be presented to both devices at all times.
... View more
May 19 2022
1:32 PM
Hi Ryan. Thanks for your response. We use Layer 3 HP switches and I have added VLAN 17 to the switch (which the Meraki AP MR46 is directly connected at the moment). The VLAN setting explicitly points to the local DHCP server. I am fine with removing VLAN tagging, for now, to see if that is the reason it is not working. I would have to change it to VLAN 0 right?
... View more
May 19 2022
7:32 AM
We need a separate wireless network for AV equipment from our standard internal wifi. This separate network will contain a few devices that need internet access, but most clients on it will only need to see each other, not go out. I have a single MR46 AP set up to broadcast an SSID specifically for this network but no clients can IP addresses from the AP. The AP is currently set in bridged mode and should be getting IPs from our local DHCP server, but that is not happening even though everything looks set from what I can tell. (Another angle: when set in NAT mode, the Meraki APs automatically give out a 10 address. Is there a way we can possibly change the IP ranges that the Meraki AP gives to match the IP scheme of our AV network? Thanks for any help you can provide.
... View more
Labels:
- Labels:
-
SSID
- « Previous
-
- 1
- 2
- Next »
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 2 | 2614 | |
| 1 | 1849 |
© 2025 Cisco Systems, Inc.
