Meraki

Community
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 

About AaronMcElhinney

Re: one-armed Vpn Concentrator in HA - MX Uplink IP or Virtual Uplink IP

by in Security & SD-WAN
‎Nov 8 2023 5:02 AM
2 Kudos
‎Nov 8 2023 5:02 AM
2 Kudos
This article will serve you well    https://documentation.meraki.com/MX/Deployment_Guides/VPN_Concentrator_Deployment_Guide#:~:text=Use%20Uplink%20IPs%20is%20selected,the%20virtual%20IP%20(vIP).&text=The%20virtual%20uplink%20IPs%20option,shared%20by%20the%20HA%20MXs.   Uplink IPs Use Uplink IPs is selected by default for new network setups. In order to properly communicate in HA, VPN concentrator MXs must be set to use the virtual IP (vIP). ... View more

VMX Visio Stencils

by in Cloud Security & SD-WAN (vMX)
‎Nov 7 2023 8:11 AM
‎Nov 7 2023 8:11 AM
I can't find Meraki VMX Visio stencils anywhere and the Security.zip file looks like it only contains the physical MX firewalls https://www.cisco.com/content/dam/assets/prod/visio/visio/security-cisco-meraki.zip   Does anybody know if there is an updated version readily available?     ... View more

Re: This switch does not have a stack configuration.

by in Switching
‎Jul 13 2021 9:37 AM
3 Kudos
‎Jul 13 2021 9:37 AM
3 Kudos
### UPDATE ###   Moving the fibre uplink to my core switch from SW1 to SW2 has weirdly resolved the issue. Both ports are configured identical.   Would be keen for someone to explain this further? ... View more

This switch does not have a stack configuration.

by in Switching
‎Jul 13 2021 9:22 AM
1 Kudo
‎Jul 13 2021 9:22 AM
1 Kudo
Hi,   I have provisioned my stack consisting of 1 x MS225-48FP (SW1) and 1 x MS225-24P (SW2). These switches have been online and working as expected for a number of days.   The stack is cabled as per the stack creation guide.   Switch 1 - Port 1 to Switch 2 - Port 2 Switch 2 - Port 2 to Switch 1 - Port 1   Both switches are running the same firmware - MS 12.28.1   Both members are in the stack and showing online. Both can be pinged on their management addresses obtained via DHCP.     I seem to be experiencing the following error "This switch does not have a stack configuration."   I have started by removing the stack configuration, cables then rebuilding the stack using the official stack creation guide to no avail.   Any advice would be greatly appreciated.     ... View more
© 2024 Cisco Systems, Inc.