Meraki

Blake7 · ‎Jul 9 2019

For anyone who finds this, I solved my problem by upgrading the WiFi drivers to the latest available. Lenovo's drivers were dated 2012 I upgraded using drivers downloaded directly from Intel's website. With the latest version installed the drivers were updated to 2017 and the problem is no longer happening.

PhilipDAth · ‎Mar 16 2018

If you are already connected, you will remain connected and everything will keep working.

AjitKumar · ‎Mar 12 2018

Hi For MAC Based Authentication you need to have an In-house Radius Server. Meraki does not offer a Radius Server with MAC Based Authentication. Once you have your own independent Radius Server either on Windows or Linux. You may connect the same to Meraki SSID. Your page may look like below with the IP address and secret key configured on your Radius. Incase you want to use Meraki Radius server which will do only Username based Authentication. You need to create User Account and Authorize them with the time the access is allowed for. You can create Users under Network-wide -> Users However prior to this you need to associate your SSID with Meraki Radius. You can do this under Wireless -> Access control Your page may look like below If required you may also customize Splash page (Landing / Welcome / Captive page) Wireless-> Splash page

Uberseehandel · ‎Mar 5 2018

@CarOneAdminwrote: MRCUR, Yes. i am using meraki hosted auth. But my question it`s how i can avoid the user & password sharing. i want only 10 machines with windows 10 connected to this SSID without the capacity of connect from another device. ....... Only 10 devices, have you considered JumpCloud - Directory as a Service ?

Meraki

Community

About CarOneAdmin

CarOneAdmin

Community Record

Badges

Re: authentication fails in windows 7 with 802.1X with Meraki RADIUS

Re: Connection on a LAN Wireless

Re: How pass the radius server test (for a mac adress ssid experiment)

Re: LAN Wireless with Meraki Radius Login