Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
- About hasnorMD
Community Record
14
Posts
3
Kudos
1
Solution
Badges
03-07-2021
08:14 PM
@DensyoV I don't see any spoofs under air marshal page. Anyway, I upgraded the s/w from 26.x.x to 27.x.x just now.
... View more
03-07-2021
06:40 PM
Thanks for the answer @DensyoV . As far as bit rate is concern, yes, the two ssid's had the same setting. The only diff they had was the auth settings. I even changed the ssid-a's min. bit rate to a higher one after I read a post to avoid a device from switching to adjacent APs but the issue still persist. As for the evetn logs, below is the snippet of one of the users:
... View more
03-04-2021
10:18 PM
Hey folks, I have two SSID's with diff authentication, ssid-a is via psk and the ssid-b is via external radius(mac address policy). Users connected to ssid-a has been experiencing cut-offs but the issue has been when we switched them to ssid-b, the connection has improved. Any ideas? TIA
... View more
12-10-2020
07:16 PM
2 Kudos
Just an update guys, replacement is in process. I'll be waiting for the hardware to be shipped out. A big point for MR over Aironet. thanks!
... View more
12-10-2020
12:21 AM
1 Kudo
@CptnCrnch its MR33. I thought so. I've already opened a case to Meraki for RMA. @DarrenOC Yes, it does have license. Thanks!
... View more
12-09-2020
06:15 PM
Hey Folks, One of our MR AP's in our office is dead due to a water leak from A/C. Is there any chance I can fix it? My vendor advised me to ask cisco as they might help me replace it. Anyone experienced the same thing? Appreciate you inputs. TIA Cheers!
... View more
09-04-2020
08:59 AM
@DarrenOC I probably have to learn how to be more patient when dealing with these kind of stuffs. @cmr this is actually related to changing some settings which only meraki support can do it. Anyway, I'll ask here should there be any issues (hopefully I won't) I'll encounter in the future.
... View more
09-04-2020
01:58 AM
I admit. I like the user interface of MR Dashboard in terms of management compare to WLC. And yes, @Claes_Karlsson is right, lots of features make the MR cool. Thats included the assistance we can get mentioned by @CptnCrnch. I probably have to be more patient then as 5-10 minutes of waiting wont kill me. Anyway, my case is now closed as the support already took an action of it. thanks for your response. Appreciated.
... View more
09-04-2020
12:54 AM
Good for you guys. It must be the time diff. I'm in UTC +8 time zone but correct me if I'm wrong, I believe their support is 24/7, right? This is why I don't prefer email because I usually get a response the next day. As of this writing, the only email I received is the auto response saying the tech support will response to me shortly. I think I'm a little disappointed in myself with my decision in migrating from WLC-based to MR. But its already done. My company has deployed more than a hundred of AP already. huhuh
... View more
09-04-2020
12:10 AM
Hey folks, I'm having an issue with my meraki wifi and wanted to resolve it hopefully within a day. I looked up on forum and found that it has to be coordinated to support to change it. Since its kinda urgent, I decided to call their contact number but the system put me on hold and have me waited for like several minutes until I decided to just hang up. Is it really normal to wait that long to be able to get accommodated? I ended up shooting them an email but I think I'll get a response tomorrow. Thank you.
... View more
07-10-2020
04:22 AM
Hey folks, Just an update. Meraki support suggested to upgrade the firmware of the AP's and voila, it resolved the issue. I thought the firmware is automatically upgraded. Thanks and keep safe!
... View more
07-02-2020
09:03 PM
@Coesione_srl thanks for your reply. Yes, all AP's are registered and online.
... View more
07-02-2020
09:02 PM
@nealgs thanks for your reply. Both SSID's are being set to both bands(dual-band). The user's device is capable of both as well.
... View more
07-02-2020
04:57 AM
I have a network contains 10 AP's (MR33) with two SSID's, say, SSID-A and SSID-B. The users are getting different signals strength from the two SSID's, one is half-bar and the other is full-bar signal. In some locations, SSID-A is totally undetected and the other is still full bar. All SSID's are advertized in all AP's. All radio settings are default. I've already opened a case in Meraki support but they haven't gotten back yet. Any ideas? I really appreciate if anyone can she some lights on this. TIA!
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 2638 | 07-10-2020 04:22 AM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 2 | 1981 | |
| 1 | 2175 |
