Hi Roska,   We certainly did not expect the security subscription to block VPN requests and the F-sec VPN client may be mis-categorized by the GX20. Would you be able to submit a support request via the Meraki GO app with any additional details so we may investigate further?   Cheers! Dom Wilkins ... View more

Hi Karl,   We currently don't have a white paper that compares the limitations between these two product lines; however, the data sheets for models in each product line can be compared.   My apologies as I know using this process for the comparison may be tedious.   Cheers, Dom Wilkins ... View more

Hey OS-Cubed!   At this time Meraki GO APs don't support extending the LAN in this manner;  Only wireless traffic will pass from the remote site and the wired traffic would get dropped before passing over the air gap.   Cheers, Dom Wilkins   ... View more

Hi redcrxss,   Meraki GO doesn't support manual configurations for DNS at this time; All clients connected to Meraki GO equipment will end up using the DNS servers configured on the Meraki GO access point if using NAT mode or the upstream device handing out DHCP to your clients.   We're always seeking to improve the product further, I encourage you to submit this as a feature request using the "Give Feedback" option within the Meraki GO app.   Cheers! Dom Wilkins ... View more

Hey Eddie!   GR APs and MR APs are configured and managed from two separate Dashboards. GR devices are configured within the Meraki Go app that can be downloaded from the Google Play Store or Apple's App Store.   Cheers, Dom Wilkins ... View more

Hey Russ!   If you've already purchased the subscriptions; they are typically delivered via email within 48 hours of receiving the devices. The Meraki Go hardware will require the subscriptions before you can add the devices to test functionality and perform a demo.   I apologize if you're noticing any delay in receiving them, but we're unable to process trial subscriptions for Meraki Go deices.   Cheers, Dom ... View more

Chiming in to confirm that Roska is correct; There is a limit of 20 Meraki Go APs per account and the APs that will be meshing do not have to be wired; however the root AP is typically wired in this scenario. ... View more

Hey Berny!   I know you're seeking an answer from someone that has experienced using the external splash page with the same number of users, but I can definitely say there should be no problem with the GR AP redirecting that many users over time as long as they aren't all connected to a single GR at the same time.   As long as your server is able to support the number of connections you're seeking, the GRs will continue to redirect clients to the configured URL pointing to your server.   Cheers, Dom ... View more

Hey Steven!   Meraki Go APs should only give out IP addresses in the 10.x.x.x space if the SSID is configured as a Guest network; Otherwise the AP should be bridging your client to the local wired network to provide it the same addressing being served by your upstream device.   If you don't recognize the 10.20.73.x address from anywhere else in your network and if there is no current SSID configured as a Guest network, please create a case with us via the app so we can help you track down who is serving this address range.   Cheers, Dom ... View more

Hey Steven!   Meraki Go APs will default to Gateway-mode, but they'll come online as repeaters for one of two reasons; Either the physical connection is currently failing between the AP and its connected switch port, or the AP has been unable to obtain an IP address to reach the Internet through its upstream device and reverts to a mesh connection.   Please feel free to create a case with us via the app if you have trouble locating a solution to bringing your APs online with the physical connection.   Cheers, Dom ... View more