>Am I correct that SSD latency might be something like 30 microseconds?   Drives like Intel's 900P have a latency of 10us. https://ark.intel.com/content/www/us/en/ark/products/123623/intel-optane-ssd-900p-series-280gb-2-5in-pcie-x4-20nm-3d-xpoint.html    Next year, who knows. ... View more

Using 10GBase-T transceiver to connect MS425-32 and storage server. However, Meraki does not make a 10GBaseT SFP+ transceiver. U can purchase one from 10Gtek which have a good compatibility with Meraki.     Here is the website: https://www.sfpcables.com/sfp-copper-transceiver-10gbase-t-cat-6a-7-20m ... View more

Update: I contacted support and after 2 1/2 hours they determined the device was faulty. Meraki shipped a new device overnight with an RMA label. I made a test network and added the new device to that network. With the new device, I connected it as DHCP to a Verizon router. It was able to reach the Meraki cloud and update firmware and it's config. I then installed the device in the rack. Through the local status page I configured the uplink static ip address. It connected to the Meraki cloud just fine. This device is the spare in a HA pair, so I then removed it from the test network and added it to the correct network. At this time the new device wouldn't connect to the Meraki cloud so I power cycled the device. BOOM, both were connected to the cloud but both were the Master because I did not connect them to the LAN yet. After connecting to the LAN my primary was the Master and the second device was the spare. Hope this helps someone.  ... View more