hi Phili I have MPLS from China To USA, aslo have a internet,   We cannot access google use internet in china,So I just want match Google traffic into mpls to USA, Then I can access, I want match some oversea traffic into MPLS, Then I can access google. But some china traffic I want use internet go out.   Hope you know what i mean, Thanks A lot. ... View more

Hi, when I open baidu.com, it does not skip another url, It's will direct open the baidu.com in China,   I think other URL also can skip to baidu.com, maybe some country cannot directly use baidu.com open the index, so we need other URL skips to baidu.com   For example, you can use bdstatic.com and bdimg.com skip to baidu.com,  but we access baidu  directly use baidu.com, not use bdimg.com and bdstatic.com   Now,I use blacklist deny all domain name, then I use whitelist allow baidu.com, In normal situation, I can‘t open all domain name,  but I can use baidu.com to open the index page, but now I can't. I can't use baidu.com open the index page, I don't know why? I think I add  bdstatic.com and  bdimg.com domain name to whitelist, also same. I still can't use baidu.com open the index page, we use baidu.com to open the index page , we don't use  bdstatic.com and bdimg.com to open it. When I allow baidu.com can access, I hope can use baidu.com to open the index page, I hope you can understand,  Thanks. ... View more

Sorry, Can you say details? I don't understand. I want use whitelist to allow baidu.com can access.I use blacklist to deny all domain name. But I think the whitelist without effect when I open baidu.com, I can't open it, I want open it use the whitelist. ... View more

Please see attend ... View more

Hi  I have tested,  but I still cannot access whitelist, I still can't access baidu.com, did you have other solutions? ... View more

I think there is no better way. Meraki doesn't have SFP 10G copper.Regarding whether or not to support third-party SFP 10G copper, you can purchase its own test from Amazon. You can see some comments about the module. Someone tested it on the Meraki MS device and it works. ... View more

About 10G SFP, You have not used it, it does not mean it does not exist，😀 ... View more

Hi watdee you can see  cisco SFP-10G-T-S, the from amazon,  https://www.amazon.com/10Gtek-SFP-10G-T-S-Compatible-10GBase-T-Transceiver/dp/B01KFBFL16/ref=sr_1_fkmr1_1?s=electronics&ie=UTF8&qid=1521306125&sr=1-1-fkmr1&keywords=Meraki++10g+Copper, below comment say can support ms225. ... View more

Hi Rifa.   About Meraki SD-WAN is based Multiple WAN links(DIA), if you have not two WAN Links(DIA), only one WAN link(DIA), I think you cannot make SD-WAN,  meraki SD-WAN  and MPLS link have not relation，The SD-WAN only can make two WAN (DIA) links, you cannot chooes MPLS link as you sd-wan, The SD-WAN based two wan (DIA), if you have two wan, you can configure Auto vpn base two wan(DIA)links Line real-time quality configure SD-WAN, you also can make base application and traffic type configure sd-wan,SD-WAN There are some parameters，for instance, link delay,Jitter, packet loss rate,etc... According to the defined parameters, select the appropriate line to send packets.   i hope usefull fo you . ... View more

Hi  Lupe if you need draw topology, you can to Cisco website download the Meraki icon, That Has vision version icon,  please see the link https://www.cisco.com/c/en/us/products/visio-stencil-listing.html,  open the link, search keyword Meraki download the icon.    I hope to help you. ... View more

The following questions are the preconditions 1. Native VLAN and wireless user vlan gateway normal.  Dhcp normal, 2. connect  AP switch port is Trunk, set native vlan,  ap can online.   3.clould manage set SSID vlan tag  wireless user vlan, configure Radius server,   if you still have issues, please check  you dhcp or Trunk link, vlan tag,  Meraki Cloud sync.    i hope helpful to you! ... View more

Hi  Joykid   reply  you 1. 2 iseeus,  if you want this “Meraki Setup ”wireless SSID again, I think you can reset you Z1 devices, Whatever, i think ,  Now about the Meraki Setup SSID already miss, so if you not way show it ,  please reset the Z1,   then set again the wireless SSID,  this configure not have via cloud sync to Z1 devices, so cannot show the signal,  This is just speculation。   3. if you reset the Z1 drivces, when the Z1 restart, you able see the Meraki setup SSID, about Z1 devices reset  please see the link .   https://documentation.meraki.com/zGeneral_Administration/Support/Resetting_Cisco_Meraki_Devices_to_Factory_Defaults   I hope helpful you , ... View more

Perhaps about two hours, but i think this update speed and related to your local network,  if you local internet speed is quickly , may cost  more less time,  Can you tell me you local manage version ? also old version ? ... View more

thanks for you reply me , about the question , i already slove, the issues  because my mx100 firmware is not last new, so i need update my mx100, but updated the mx100 need cost more time , so we need Wait patiently， still the mx100 White light is on， ... View more

Yes, I Know this MS350-24X provide Multigigabit Ethernet connectivity, support 10G copper and 10G fiber , but the ms350-24X Cannot meet my needs， I need 26, 10G Fiber cub and 4 10G copper cub, So I Choose the MS425-32X, but the MS425-32X not support 10G copper , So i'm very Tangled， I only choose ms425-32x and 10G copper moudule. ..... ... View more

yes. you are right,    i already use SFP-10G-T,    I am currently testing it ,I will take your advice， thank for you answer!  ... View more

HI  ,   I  need 10G copper (electrical) modules   ... View more

Yes， I know you mean ,  maybe   I description not well ,  Now，I have two MS425,  and one storage server,  the Storage server  is copper wire， i need use copper  wire connect my ms425,    So I need optical fiber transform to copper ,    Do you have a suitable optical fiber  module recommended?  ... View more