The environment is an auto dealer mechanic shop so it is FULL of electromagnetic interference 👍 ... View more

Correct no use of IPV6 for this site and the printer is Wi-Fi enabled but used only locally by the one user. Many thanks.. will add these changes to my list of site based touch points for the many changes I need to do..   Thank you.   ... View more

I inherited the site and still uncovering things. So will focus on moving over any devices left on two remaining 2950s to the MS220s.   I also had one PC (be it Windows 7) that was only connecting on the Meraki MS220 port at 10M even thought NIC and Meraki are 1GB AUTO. I forced both NIC and Meraki port to 1GB FULL and so far looks OK (the latest LAN driver and BIOS were installed). ... View more

@ndccpf1    Thanks for sharing the topology to this thread.   I can see the MX80 and others are in same logical network. If we talk about utilisation of top device on Summary report, the edge MX80 would be listed as top device but I do not think it is expected that Clients page reports LAN and WAN interfaces on the MX80 in the same network as top two usage clients.   It would be good idea to clarify with Technical Support why the status is reported on the Clients page. ... View more

I have the same issue on my 15 AP network. Trying to figure out why. Fairly new Dell desktop that was just re-imaged for Win10 Home. ... View more