That was it! I was running the packet capture on the switchport the camera was connecting to. Once I ran a capture on my first switch outgoing port, all the specific traffic is showing the new DSCP. Thank you for the quick help on this! ... View more

Only users in the EU have the ability to forget clients from the client list. ... View more

On the MX, outbound traffic refers to traffic originating from one VLAN that is destined for another VLAN or traffic originating from the LAN that is destined for the Internet or a remote network that is located over a static LAN route.   The inbound rules are destinated for traffic coming from the internet.   https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Using_Layer_3_Firewall_Rules ... View more

I have a doubt for iOS devices that was co figured by SSP and after a period the certificate expired has an automatically way to update this without the user did the procedure manually again?   If I renew the certificate before the expired , Meraki will send to device the update of this certificate automatically?   Regards, JF. ... View more

  @PhilipDAth wrote: >Where is that in the Office 365 Portal? I'm searching around for it   https://admin.teams.microsoft.com/  Thanks, yep I found it there under Meetings > Meeting Settings > Network. ... View more

Same behaviour observed with Mac devices for us. Upgraded 15 MR53s last night from MR 26.8.1 → MR 27.5.1 Woke up to no Apple devices working at all. Both Macbooks and iPhones.   Rollback to 26.8.1 fixed the issue for us.   Could this be related to Apple's latest changes on mac address randomization? https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Meraki_and_iOS_14_MAC_Address_Randomization ... View more

There's definitely no need for as many as 8. It's me getting it down beyond 5 is the big concern. We have to have separate ssids for Students, Guest, Teacher/School Assigned Faculty, District Staff & Non School Assigned Mobile Devices (Each have different access levels regarding Content filtering and bandwidth). I think 5 will be a good start for me at least. ... View more

Changing authentication didn't help me. I got away from a combined hardware network and switched to the default meraki wireless template - no problems since this change.  ... View more

@dmiss wrote: Yes this helps alot--as I was told this exact thing, but it would not work over a SMF line that I had so assumed the guy may be incorrect in his info. Looks like I may just have to do some additional testing to see if I got a bad sfp.  Yup, that is incorrect. LRM will operate over both MM or SM.  ... View more