- About sebastianfranco
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
sebastianfranco
Here to help
Member since Oct 21, 2017
04-02-2019
Community Record
12
Posts
0
Kudos
0
Solutions
Badges
12-18-2018
04:19 AM
jajajajaja very good news ... de este lado del mundo !!. Gracias.
... View more
10-24-2017
05:36 AM
Thank you for your reply Philips, and the answer is no, my isp is not doing NAT, its means that i need a Router in the mittle, don,t you?
... View more
10-23-2017
12:43 PM
This is a printscreen of the MS350-24X: the first interface is to get the switch into the subnet of the isp modem with the ip 192.168.1.3 the second is the dhcp pool i created to conect the MR84 as dhcp clients of the switch the third is the static route to the internal isp modem ip. (here i should change it for the external ip instead the internal?). this is the config i tried but with no success. thank you in advance and excuse me for my poor english.
... View more
10-23-2017
09:22 AM
Thank you Philip for your reply, i have this scenario: my isp provides me with one unique public IP and no DHCP they say me their device doesn't support DHCP so i can connect one only device directly to internet forcing me to install a router or in this case the Meraki MS350-24X. I have configured a DHCP server on vlan 10 on the MS350 and a interface with the public ip like gateway, trying to use it like a bridge between both networks but i get the MR84 connected on the MS350's DHCP Pool but they can´t reach the internet so i need help with this configuration, can you help me with this? tahnk you again. and best regards.
... View more
10-21-2017
06:20 PM
Thanks for the reply Philip can be in the same vlan and also not be I'm not using an MX Thanks
... View more
10-21-2017
05:57 PM
Hello everyone. In a situation with 20 AP's MR84 and only a one public IP, I like giving DHCP with the MS350-24X to all the APs and their respective clients? What would be the best configuration ?
... View more
10-21-2017
05:09 AM
that good question I also did it to me but with the M-ANT-27 I assume as it says @Ryan-Zimmerle that they are contemplated
... View more
10-21-2017
04:55 AM
Marcio, how are you? MR84 supports it without problems and I have used it with more than 400 clients in both bands simultaneously https://meraki.cisco.com/products/wireless/mr84 I have many units and they work great
... View more
10-21-2017
04:07 AM
send that gift to argentina? ..
... View more
