Meraki

watdee · ‎Sep 17 2021

Just found some more info regarding other brands and stacking two switches with one cable. It sounds like it works fine just isn't recommended for redundancy reasons. https://networkengineering.stackexchange.com/questions/62651/how-many-stack-cables-would-be-needed-if-we-want-to-stack-two-3850-switches https://community.extremenetworks.com/extremeswitching-other-233226/how-many-stack-cables-for-two-switches-stack-6755077 https://community.cisco.com/t5/routing/number-of-stack-cables-for-two-3650/td-p/3179794 I'll probably end up using two cables to be on the safe side.

msosa · ‎Dec 22 2020

Hello Everyone! I went to the customer and now it is working, I thank all the comments you gave me, there was nothing involved with the problem we had. the fix procedure we found was: - disable all firewall and antivirus software from the windows computer. - disable/enable the wireless adapter - Connect to the network, try to cast, it works. - enable firewall/antivirus software - the cast still working - we also reboot the computer, and the cast still working. The parameters of the configuration at Meraki are: - Separate SSID yes and dis-similar SSID have worked. - Bridge mode yes - Band Steering enabled - Multicast to Unicast conv disabled - MR45 - Rls 27.5.1 - 802.11ax enable thank you all!!

WanGuy · ‎Aug 10 2020

Has this dashboard interface been released? After freshly rolling out a new Meraki infrastructure, I am in need of a way to get a list of printers in each of my 200 networks.

BrechtSchamp · ‎Feb 26 2020

I believe the max execution time for Google scripts is 6 mins. You must be hitting that. If your organization uses G suite, you can sign up for the Early Access Program and extend it (from what I read), otherwise the advice is to tweak your script to run for shorter time. If you're willing to tweak the code you can look here for some tips: https://stackoverflow.com/questions/41971806/how-can-i-increase-the-6-minute-execution-limit-in-google-apps-script https://stackoverflow.com/questions/38665061/google-script-exceeded-maximum-execution-time https://stackoverflow.com/questions/7854573/exceeded-maximum-execution-time-in-google-apps-script

JoRett · ‎Sep 2 2019

I'm using 10m 10G Twinax (Cisco SFP-10G-AOC10M) between a MS350 Stack and a C9500 stack.

Gerardus · ‎Apr 23 2019

great idea for surf report! 🙂

msosa · ‎Apr 22 2019

Thank you for your answer!

msosa · ‎Apr 17 2019

Thank you @PhilipDAth actually it is relative to the entire image.. when you define zones it only counts the persons on that zone..

msosa · ‎Apr 17 2019

thank you for your response, now I know it is only possible at owner mode, and the test I´ve been doing was not really that mode, I´ll do more test when I jave the devices, and fi it not works, I´ll try the way you said.. thank you!

beks88 · ‎Apr 4 2019

No it won't cause issues. The token is just a handshake between DEP and MDM. The devices get through push notification an info which MDM they belong, that's it. All other things happen on the MDM side. This doesn't effect any enrolled devices

msosa · ‎Jan 30 2019

UPDATE: I moved the MX to the front of the firewall and it worked ok, certainly it was doing something strange but I´m sure it was not blocking anything.. and the funny thing is that the tunnels worked some times.. anyway it is ok now, thank you all for your comments!

PhilipDAth · ‎Nov 14 2018

This is the list of all officially supported modules. https://meraki.cisco.com/lib/pdf/meraki_datasheet_sfp.pdf SFP-10G-LR-S is hihly likely to work, but is not officially supported. If you run into an issue and support think it may be related to the SFP+ being used they may ask you to replace it with a supported module before continuing to help.

jdsilva · ‎Oct 28 2018

Nope. It can do port forwarding via its WAN IP, a 1:1 NAT, or a 1:Many NAT, but it doesn't actually proxy those connections.

msosa · ‎Aug 21 2018

Hello, the Z3 is an MX device that also acts as an AP, but like other MXs devices, that has a similar concept (MX64W and MX65W), if you have it in a networtk with other MR devices, it does not participate with them to build the heat map you can see within the Wireless/Monitor/Location Heatmap, neither integrates to the Wireless configuration settings, it has an independent WIFI configuration.

pjc · ‎Dec 14 2017

You can ask support to enable a switch in the dashboard for your network to turn off meshing. I recently asked for this, as I was seeing a WEP encrypted hidden SSiD from every Meraki AP being broadcast on both 2.4ghz and 5ghz (these are used for the meshing functionality), and wanted to cut down on unnecessary radio/SSi'd on our network (as we do not or have plans to use meshing) Unfortunately, even after turning off the meshing option in dashboard, you will still see these hidden ssid's broadcasting on your network. Meraki tell me that they cannot turn these networks off, they are permanently on by design !!

PhilipDAth · ‎Oct 19 2017

If you think I helped it would be great if you could give me some Kudos.

Meraki

Community

About msosa

msosa

Community Record

Badges

Re: How many stacking cables do i need to physically stack two MS250-48FP-H...

Re: Configuring chromecast on SSID?

Re: Get client information of organization

Re: Google sheet Report - "Exceeded maximum execution time" error

Re: Meraki SFP's/SFP+'s and Twinax Copper compatibility with Cisco SFP's/SF...

Re: Congratulations to our photo contest winner: @msosa!

Re: Kiosk mode on Windows device

Re: MV Sense and MQTT message coordinates

Re: Android device Camera blocking not work

Re: Apple MDM and DEP

Re: SD-WAN All tunnels not established

Re: MS425 1G backward compatibility

Re: MX Reverse Proxy

Re: Meraki Heat-mapping

Re: Avoid bridge connectivity

Re: PMS integration

Re: SD-WAN All tunnels not established

Re: Configuring chromecast on SSID?

Re: MV Sense and MQTT message coordinates

Re: Apple MDM and DEP