Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About NickCalcutti
NickCalcutti
Getting noticed
Member since Oct 10, 2017
Oct 27 2018
Community Record
28
Posts
7
Kudos
3
Solutions
Badges
Oct 11 2018
9:55 AM
2 Kudos
@MerakiDave@PhilipDAth Well i got my Z3C to work Once i got a static IP address from ATT and they sent me their APN info for it the Z3C came right up and i have it in the field right now working like a charm
... View more
Oct 11 2018
5:55 AM
Funny i have the exact opposite issue with my ATT Sim, i cna pop my SIM out of my phone and the Z3C works fine (besides AUTOVPN which is a whole other issue) and when i pop in a Data Sim activated from ATT the Z3C says reading then shows its an ATT sim than blanks
... View more
Sep 23 2018
8:31 PM
I already have and they pointed to att. They want me to ask for a port forward or and no foreeall enabled public IP address with the port forward. Because of the nat type unfriendly error. I had the same thing happen with USB cellular devices on the other Z3 and figured it was the cellular devices and when I got the Z3C I figured that would resolve it and I and finding out that was wrong
... View more
Sep 23 2018
7:36 PM
I have other MXs connected to my main hub but the Z3C will not do it over cellular but I can get the Z3C to work with a third party firewall and do ipsec site to site .
... View more
Sep 23 2018
7:05 PM
i am running 14.33 on the new Z3C, also i have the Cellular Enabled. also it saw the Sim model and the carrier of AT&T and i dont have the APN in the dashboard. i got the Site to Site working with a 3rd party firewall but AutoVPN doesnt work.
... View more
Sep 22 2018
12:52 PM
yeah, working with the ISP can be a process. was wondering if anyone had easier luck with it
... View more
Sep 22 2018
12:42 PM
I have the New Z3C and i have an ATT SIM installed inside of it and i am getting nat type unfriendly, now i tried with the MX64 and also Z3 without SIM, using approved USB cellular options and i had the same issue. Anyone else ran into this issue give a little guidance? Right now i am using third party peer to my main firewall. But if i had AutoVPN working without doing that life would be much easier Thanks Community
... View more
Oct 16 2017
10:42 AM
So TLS didnt fix it, i deleted the policy and went through the steps again and followed the Steps for the Windows 7 document again and everything works now. Thanks for everyones help
... View more
Oct 12 2017
11:50 AM
I just find it hard that windows 10 and mobile had no issues but windows 7 devices due have issues
... View more
Oct 12 2017
11:49 AM
When I get back to the office I'll double check but I'm sure it's the self signed from the IIS but I could be mistaken.
... View more
Oct 12 2017
11:44 AM
Yes, I can see it in the certificate list under the 802.1x settings on the properties of the WiFi but I have tried it both, with and with out server validation and no luck. Now it is a self signed cert and I noticed in windows error logs to diagnose the issue it does state eap failure due to certificate issue but don't know how to resolve that since it sees the certificate
... View more
Oct 12 2017
6:58 AM
I have just installed a radius/NPS server and applied the configurations to the SSID i wanted to test it on. It worked great for Windows 10 laptops, android and apple phones Windows 7 keeps saying there is an authentication issue. i followed the directions with this document https://documentation.meraki.com/MR/Encryption_and_Authentication/Enabling_WPA2-Enterprise_in_Windows_Vista_and_Windows_7 and still no joy entering in my credentials. Does anyone else have and issue or a helpful tip with windows 7 devices? thanks
... View more
Oct 12 2017
6:52 AM
i have had better success in fire stations with a ceiling mount vs wall mount. i have devices ti support out in the bay and usually mount the device inside the building over their office area to provide coverage there for laptops. Mounting on the wall never gave me the coverage i needed
... View more
Oct 12 2017
6:45 AM
i would say run the wire for the ground. better to be safe with that measure. Shielded ethernet couldn't hurt but then it raises your cost of the project a bit.
... View more
Oct 10 2017
10:37 AM
1 Kudo
I have the MR72, and MR66 and they seem to do fine without tape i only have had 2 die on me in the 3 years of using them but i think that was more of a grounding issue.
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 9986 | Oct 11 2018 9:55 AM | |
| 9289 | Oct 16 2017 10:42 AM | |
| 6471 | Oct 10 2017 10:37 AM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 2 | 9986 | |
| 1 | 6471 |
© 2025 Cisco Systems, Inc.
