Hi,   Did anyone find any solution for this as neverssl.com does not as expected most of the time. This is serious and frustrating issue as there is no way to open the splash page. Please guide me if anyone has some work around. ... View more

Friend, I have the same problem, it automatically redirects me to the page https://www.msn.com/es-cl/?ocid=wispr&pc=u477, I have tried by all means to leave the page http://neverssl.com default , to show the welcome page, but it doesn't. Whichever welcome page you use, it redirects me to msn.com I have searched forums but still can't get the welcome page working. If you could help me please.   ... View more

You can't use stick mac's on an MX64.   But if you are using 802.1x authentication then only authentication devices can attach anyway.  802.1x is like an improvement over stick mac. ... View more

  All MX models support a splash page that authenticates against a RADIUS server. Enable the splash page and set it to authenticate against the ISE RADIUS server. https://documentation.meraki.com/zGeneral_Administration/Cross-Platform_Content/Configuring_RADIUS_Authentication_with_a_Sign-on_Splash_Page     The MX64, MX65, MX64W, and MX65W support access policies including 802.1x. You can point the MX to authenticate the ports against the ISE RADIUS server: https://documentation.meraki.com/MX/Access_Control_and_Splash_Page/MX_Access_Policies_(802.1X)     You can see the matrix of compatibility for MX on the document here: https://community.cisco.com/t5/security-documents/how-to-integrate-meraki-networks-with-ise/ta-p/3618650 ... View more

I had the same issues. After updating firmware to 10.45 the error didn´t appear again. ... View more

Yea we have now added a MX at our data center and have one branch setup just using the meraki autovpn and a low cost coax internet connection. We are in the process of converting our MPLS network over to a layer 2 solution from AT&T. We are going to be testing one branch to use the AT&T connection as the primary link and then a low cost internet connection as a secondary connection to use the meraki autovpn. ... View more

Not to highjack this thread but I was wondering if anyone has had any issues with creating a group policy and applying the splash page bypass but it not working properly? I'm trying to think of some troubleshooting steps but I'm not sure where to start. ... View more

Thanks for the info! At least I know I'm not just missing a section of the logs or something of that nature.      ... View more