Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
- About JacoboLevy
Community Record
27
Posts
0
Kudos
0
Solutions
Badges
01-30-2023
07:06 AM
I plan for this deployment to use the sfp from the MX-105 to my first switch MS-225 and then do a stack of 6 switches in total.
... View more
01-19-2023
08:28 AM
it does not show anything related to VLAN the most I see is VPN Tunnels
... View more
01-19-2023
08:01 AM
I have a Dumb question Are all the needed subnets on the allowed list on each Firewall site-to-site configuration? (you have Azure subnet 10.3.0.0/16, then your local subnet x.x.x.x and the Client VPN 10.10.10.0/24) you should have all those IPs on the allow on each point so they can accept that traffic.
... View more
01-19-2023
07:41 AM
Good morning everyone. Quick question regarding MX sizing. I have a new project for a multi-office space (24 offices) in 26k Square FT in total area. I was thinking of doing 24 VLANs (1 per office) and 1 Vlan for the shared WIFI. so in total 25, Are there any limitations on the MX105 for the VLANs that it can manage?? also thinking of APs to cover the entire location, should I go bigger, or does it sounds reasonable?
... View more
01-18-2023
06:49 AM
Primero que nada tienes que tener la funcion habilitada, en Network Wide - General hay una funcion que dice Traffic Analysis, alli el el drop down tienes que tener la opcion que dice Detailed: Collect Destination Hostnames. Una vez que eso esta habilitado puedes ir a la lista de clientes y debajo del Pie va a salir un More>> cuando le das alli te sale las paginas web detalladas y al seleccionar la que quieres puedes ver que clientes han ido a ese destino.
... View more
08-24-2022
02:13 PM
Good Afternoon Gurus, Is there a way to configure a Non-Meraki site-to-site VPN to be in a dormant state in case the primary tunnel fails the second one comes online?
... View more
08-12-2022
12:09 PM
Good Afternoon my fellow Meraki gurus. We have noticed a weird situation with several of our clients. Site to site is down for sites that have ATT as ISP. if we change the connection to Comcast or any other ISP the Tunnel comes online. ATT tunnel is down. is also blocking our monitoring agents to call back to our colo. We have talked to ATT using each of the affected client's accounts and no Firewall rules or traffic blocks are being applied on the ATT side. we talked to Verizon on our colo and no traffic is being blocked on the receiving end either. Again if I change ISP on client side (our agents and VPN tunnels start checking in) on ATT no joy Tested MX firmware version 16.16, 17.7 and 17.8 same results
... View more
Labels:
- Labels:
-
Auto VPN
08-10-2022
06:29 AM
Buenos dias. Si el equipo pertenece a alguna organizacion o esta registrado no vas a poder agregarlo a una organizacion que tu hagas, quien te lo venda debe removerlo de su inventario para que tu puedas hacer el registro en el tuyo.
... View more
03-22-2022
04:04 PM
Quick question for all. I'm trying to use MDM to deploy SentinelOne to one of our clients that is using all macs on their location. I have been able to create the app with no issue but when the app installs it requires a SiteToken in order to know to what organization it should point on the SentinelOne Dashboard, is there a way to configure MDM to do so automatically?
... View more
03-07-2022
02:44 PM
Given all the added security being implemented due to the Russia/Ukraine conflict, I have a question, is it possible to generate an alert when certain websites are visited, for example anything that ends on .ru or that is in Russian for example?? I know that with MX and Advanced Security licenses you can do a layer 7 and block the country from and to, but on places where there is no advanced security, I would like to see if such a report could be generated.
... View more
01-06-2022
01:42 PM
😵 😵 😵 😵 😵 😵 😵 you just killed my high lol.
... View more
01-06-2022
01:37 PM
OK I get that but how do you sort out the users connected to the Client VPN that need to go to specified VLANs. I know I can do the Vlans thru the policy but do I need to wait for each user to connect in order to add it to the group policy?
... View more
01-06-2022
11:09 AM
Happy new year you all-mighty gurus in this community. I have an MX100 at one of our clients who are in the executive suites business, obviously, each office is already segregated with its corresponding VLAN, and all those nice things are capable with MX, MS, and MR. my question is the following. Is it possible to have Client VPN users connecting in and then routing them to the desired VLAN? I have 25 offices (25 Vlans) and need to have more that 3 using Client VPN in and segregated to their respective network
... View more
Labels:
- Labels:
-
Client VPN
-
Other
10-14-2021
08:07 AM
mostly horse stables and training, maybe they need to watch Mr. Ed.
... View more
10-13-2021
02:56 PM
Would love if meraki had a design tool just drop the map and let it do its magic
... View more
10-13-2021
08:09 AM
Good Morning, Meraki wizards. I have a project to cover an exterior farm of about 4.5 acres, that needs complete coverage. if each AP is wired I was considering 4 one on each corner facing inwards, if not wired I would have 5 main one would be wired in the middle and the rest in the same position. let me know if this is overkill or someone has a better idea.
... View more
07-15-2021
09:06 AM
If I was you I would put it outside my network, free open-source things tend to create some sort of fear in me, or is it because all my networks need to be tightly secured. But if you want to continue, you can create a reservation for your device on the MX, and then do a 1:1 nat from one of your Public Static IP's from your stack to the device, if you have no public statics IPs just do the reservation for the device and then make sure to open port 44158 to that and you should be all set.
... View more
06-29-2021
03:57 PM
Helium is a crypto currency, Helium Miners are a some-kind of wifi router and you get paid In Helium installing a wifi router on any network you own sharing your bandwidth and depending on the amount of users/traffic that you generate or serve is how much you get paid. Of the 70+ organizations with Meraki that we manage just today we found 3 devices (the where all in an executive offices kind of business) so not too much of a scare but at the same time that was discovered i had members in one of the locations complaining of dropped zoom calls so no clue if it was related or not. Also generated a concern that if someone adds it to a secure network (lets say Law Office or other) what guarantees are there that the said user can’t get in.
... View more
06-29-2021
07:13 AM
Hello to all. I was wondering if there is any way that the MX can identify Helium Miners or a way to automatically disable them once they hit the network.
... View more
06-05-2021
08:03 AM
The main reason why he bought the Eero and has 7 of them deployed besides that he does not need to buy a license for them is that he can jump in on his Eero App phone and disable his son profile whenever he doesn’t do his chores. the only way I think i might be able to achieve this is turning off DHCP on MX connect a Eero directly to the MX and from the eero to the main distribution switch. Let me know of it makes sense
... View more
06-05-2021
07:16 AM
I tried that but had trouble with half of the home automation system, whatever is wired is not talking to the wireless devices and viceversa.
... View more
06-02-2021
04:26 PM
I have a client that has an MX64 at home in order to have site-site connectivity to his businesses and he is currently using EERO AP’s on a bridged configuration not routing anything all handled by Meraki. he wants to discipline his 13 year old removing access to wifi (streaming, gaming etc) with an on/off switch EERO allows you to do that as long as is doing the routing (not in bridge) i could do a separate VLAN for the EEROS but then need to deal with all the routing between the smart home devices (wired and wireless) and don’t wanna deal with double nating looking here for any Ideas/Recommendations on how to. thanks in advanced.
... View more
09-24-2020
11:39 AM
@KRobert I had the same issue and i had been fighting over a week with this. THANKS!!!!
... View more
