Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About JaiminPatel
Community Record
20
Posts
7
Kudos
0
Solutions
Badges
Mar 3 2020
9:18 AM
You can perform the reset on MX to clear the DHCP lease. I just did it on my Z3 and it worked. Please take a note that there will be a down time if you reset the MX.
... View more
Oct 22 2019
7:36 AM
We have deployed ISE in our environment and we fully setup Radius authentication from MR53s. We also have MX for home VPN and would like to setup radius authentication but it has different options then MR53s. Is there a different way to setup radius authentication on MX devices? Please provide a step-by-step document if there is available any.
... View more
Mar 6 2019
6:22 AM
Yes. It should upgrade once it connected to the cloud. I was in the same situation when i was upgrading the security appliances.
... View more
Mar 6 2019
6:19 AM
I have one MR53 that is going offline intermittently. when i do shut/no shut on switch port it stays up for a bit and then goes offline. Could not find the root cause. Below are more details for you to help and understand the issue. =================================================== Troubleshoot performed : 1. used another port on same blade - no luck. 2. used different blade - no luck. 3. replaced the cable - no luck. 4. connected different working AP on same port - works fine. 5. connected faulty AP to working AP port - no luck. =================================================== Pic-1 - shows up for long period of time. In the morning suddenly it went offline. Pic-2 - shows Event log of the AP. Pic-3 - below is from Switch log. (interface Gi1/16 where the AP is connected. ---------------------------------------------------------------------------------------------------------------------------------- Mar 6 08:07:07: %ILPOWER-7-DETECT: Interface Gi1/16: Power Device detected: Cisco/IEEE PD Mar 6 08:07:07: %C6K_POWER-SP-1-PD_HW_FAULTY: The device connected to port 1/16 has a hardware problem. Power is turned off on the port. Mar 6 08:07:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/16, changed state to down Mar 6 08:07:08: %LINK-3-UPDOWN: Interface GigabitEthernet1/16, changed state to down Mar 6 08:07:08: %LINEPROTO-SP-5-UPDOWN: Line protocol on Interface GigabitEthernet1/16, changed state to down Mar 6 08:07:08: %LINK-SP-3-UPDOWN: Interface GigabitEthernet1/16, changed state to down ---------------------------------------------------------------------------------------------------------------------------------------------- If it is really a hardware problem then why it would stay online from Mar 5 15:55 to Mar 6 08:09? ---------------------------------------------------------------------------------------------------------------------------------------------- Pic-1 Pic-2
... View more
Dec 12 2018
8:26 AM
How the firmware upgrade will proceed to offline device if i schedule an upgrade? Does it upgrade automatically when it is connected to cloud or i have to reschedule it?
... View more
Aug 22 2018
5:21 AM
2 Kudos
Congratulations Meraki community and Happy Birthday.......!!!!
... View more
Feb 20 2018
12:45 PM
2 Kudos
The company where I am working has multiple offices as well as a number of teleworkers, which can make networking and security monitoring a challenge. The Cisco Meraki wireless networking solution, lets the Network Team easily manage the disparate networks from anywhere and troubleshooting. The old days of supporting our teleworkers’ personal home routers are gone. Let me say, what a relief! Implementation has been smooth, and the integration with existing Cisco systems has given the client options for future equipment upgrades when they’re needed. I am completely satisfied with the Cisco Meraki wireless networking implementation. Support has been great, and I have been able to reduce the amount of time I spend configuring and managing the network. And that allows me to spend more time working on performance tuning and monitoring our network.
... View more
Jan 8 2018
12:18 PM
1 Kudo
My 2018 goals are : 1. Don't let Network down for longer time. 2. Providing continuous WiFi access to clients using MR53. 3. Keep learning more and more about Meraki... 4. Fine tuning the existing Network... 5. Work ethically and hard but learn to say NO when it is to much.
... View more
Dec 20 2017
6:04 AM
Another way is follow the below link.. https://documentation.meraki.com/MR/Other_Topics/SSID_Availability Let me know if this answers your question.
... View more
Dec 14 2017
10:54 AM
Meraki is to designed to do client balancing if required. Client Balancing is enabled by default on every MR access point. Client Balancing is compatible with all client device types and uses a combination of Meraki-proprietary and industry-standard techniques to gather information and steer clients. Client Balancing may be disabled on the Radio Settings page if the Administrator prefers.(I would not prefer to disable the Client Balancing.....) https://documentation.meraki.com/MR/Other_Topics/Client_Balancing
... View more
Dec 5 2017
10:25 AM
Is VLAN and DHCP configuration is on same device? If you can provide a VLAN configuration and DHCP configuration will help me to understand the scenario.
... View more
Dec 5 2017
7:18 AM
You might want to do forget network from the device and re-establish the connection like first time....
... View more
Nov 21 2017
11:39 AM
We have 70 MR53 APs in single network. I need to do some troubleshoot with one of the AP. How to put individual AP into maintenance mode so the Meraki cloud don't send an email as an alert email for that AP?
... View more
Nov 17 2017
6:44 AM
Hi Guys, PoE 802.3af means running in low power mode or PoE 802.3at? I am using MR53 device. See my screenshot below... Mine doesn't say running low power mode.
... View more
Nov 15 2017
12:00 PM
2 Kudos
Advanced Malware Prevention (AMP) inspects all HTTP file downloads through a Security Appliance and blocks/allows file to be downloaded based on threat intelligence salvaged from the AMP cloud. Intrusion Detection and Prevention Intrusion detection strengthen all packets flowing between the LAN and Internet interfaces as well in-between VLANs and records the produced alerts to the Security Report. Intrusion prevention blocks all the traffic that is identified as malicious, rather than just generating alerts. Whitelisting signatures You can create list of specific signatures by clicking Whitelist an IDS signature. Any signatures for which matching traffic has been seen by the appliance will appear in the Select an Option drop-down so that you can select which signature or signatures you wish to whitelist. Security Report The report delivers you a graphical depiction of Intrusion Detection events in your network.
... View more
Oct 11 2017
11:48 AM
No. It does not have a pencil icon... LLDP device means on a switch itself where the AP is connected? How do I change on LLDP device?
... View more
Oct 11 2017
11:18 AM
Does it work on older IOS and on Android device too?
... View more
Oct 11 2017
10:17 AM
How to I change the description of Ethernet 1 LLDP on dashboard? I would like to shorten the description.
... View more
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 2 | 31705 | |
| 2 | 27337 | |
| 2 | 35834 | |
| 1 | 57342 |
© 2025 Cisco Systems, Inc.
