All genius here together 🙂  ... View more

Maybe only us B rexit Bods ... View more

Yes @Inderdeep !  ... View more

Thanks @DavidLowe , My answer was correct 🙂 ... View more

Just one thing to add to this;   there's only an implicit allow if the packet is received on a LAN interface.  If it's on a WAN / Internet port (with no matching outbound session), it hits an implicit deny - of course! ... View more

@DavidLowe I said it right, thanks 😊  ... View more

@IsacVries are you still having issues with 27.6, I have both MR55 and MR56 and the MR55 has finally come good of late. ... View more

@RafaelM @DavidLowe    Thanks for the feedback and yes, as soon as we can take the exam I will.   I hope we will get a couple of go's as there will be a gap between the course and the exam 🙂   BR   -Gary ... View more

Welcome to the community Himanshu! ... View more

Hi Steve,   Did you manage to get this working?    There are no firewall settings to be configured (other than perhaps preventing wireless clients access the LAN)   Double check that the client device you are using isn't already associated and authorised.   On connection to the relevant SSID you should get the following default prompt (with your SSID name):     More info here: https://documentation.meraki.com/MR/MR_Splash_Page/Configuring_a_Prepaid_Card_Billing_SSID  ... View more

Welcome!   As abernoth said, learning all of Cisco could take a while... but you are definelty in the right place for Meraki!   Make sure you visit our learning hub and if you are a cisco partner, visit the partner portal for more training 😉     ... View more

What an experience Cisco live was. I really enjoyed the labs, the sessions and meeting you. Nice swag take home.  See you next time. ... View more

Now I feel dumb! I could've sworn it was in the help menu. Anyway, I will make a wish now 😄   Thanks for the headsup! ... View more

I'm using MX64, MR33, MS220-8P. That last one is EOS and has been replaced by MS120-8LP/MS120-8FP.   If buying new I'm not sure I'd go for MX64 nowadays. I have a feeling it'll be replaced by the MX67. But indeed, it is a bit cheaper than the MX67.   As @DavidLowe already mentioned, If you're planning to combine the WiFi from the MX68 with the MR33's WiFi, I'd advise against it. They're configured completely separately and therefore don't play along too well.   Similarly don't expect the same features on the built-in switch of the MX68 as you would find on a separate Meraki MS switch. ... View more