Greetings ,   Is there a rear view stencil for the Cisco Meraki MX105, MX95? I can't find any in zip file.   That link is not updated, I have checked this link https://www.cisco.com/c/dam/assets/prod/visio/visio/security-cisco-meraki.zip   Please provide updated Visio stencil link. ... View more

Thanks ... View more

Any update on this? ... View more

Hi,   Did you ever find a solution to your need to report / alert on MX device uplink packet loss?    Thanks. ... View more

But most customer would rather like it just to be there in the UI. I mean, all the data is there in the dashboard, its just an UI change. I really wish they would fix that (yes I call it a fix, because the current solution with only 30 lines is not good).   ... View more

After you have the link, request the link.   try : response = requests.request( "POST" , urlApi, headers =header, data =payload) except : print ( 'error' ) print (response.status_code) if response.status_code == 202 : urlVideo = response.text time.sleep( 5 ) # wait 5 sec then the image is availble dc_data = eval (response.text) urlVideo = (dc_data[ 'url' ]) resp = requests.request( "GET" , urlVideo, stream = True ) fn = 'imagename.jpg' try : with open (fn, 'wb' ) as f: for chunk in resp: f.write(chunk) f.close()   ... View more

Thanks all! That makes sense and I can work with knowing that it's about 5 minutes. ... View more

Indeed, thanks for the report and more importantly for opening up a case – that ensures we are getting the report over so we can fix these types of issues for our devs out there 🙂 ... View more

You can check out the recent integration that DD created for Meraki here:. It is a crawler for pulling network event logs into DD: https://docs.datadoghq.com/integrations/meraki/ ... View more

There are a couple of ways to handle tags (The article assumes more than one MX, so the location tags are never removed/deleted hence they always exist in another network).  You can accomplish this by having an empty network hold the tags so they always exist.   1. Create a VPN config holding network:  (Network itself should not contain an MX - Good in the case only 1 MX has VPN config) Organization > Create Network > Select Security appliance name "VPN Tag Hold" 2. Add a tag to the network ^ ie. [location]_primary_up and [location]_backup_up Never remove the tags from this network, so they always exist. 3. Apply this tag to the multiple Non-Meraki Peers availability section This will hold the Non-Meraki VPN peers config as you switch real network availability tags as it cannot be empty. Then you can assign and remove the tags from the live MX network to fail between them without the error they don't exist. The other option would be to have a hold network and a tag per location that represent the MX location itself.  You would then have a VPN configuration in the availability will always have a holding tag from the network that's not used such as vpn_tag_hold (This merely maintains the configuration available in the site to site vpn Non-Meraki peers section.  From there you could always just add/remove the specific network's availability tag (ie. if primary is down, you'd use [location]_backup_up tag in the 2nd 3rd party peer however if the primary is up this config would be removed and you'd have [location]_primary_up in the 1st 3rd party peer availability section)   Cheers, -Raul ... View more

Applied, Sounds awesome! ... View more

FYI team, we just released a complete update of the Python SDK/library where pagination and query array parameters are handled automatically. You can find more details here on this post in the Early Access Developer Program: https://community.meraki.com/t5/Developer-Early-Access-Resources/Python-SDK-entirely-revamped-amp-updated-package/ba-p/69842 ... View more

I found that anything less than a 30 second delay was sketchy. It might toggle the PoE or it might not. I think it depends on timing and latency. The ping idea is clever and I'm disappointed in myself for not thinking of it myself.   I guess I'll need to make a get-client type call to grab the IP address, but that should be easy enough. This should speed up the script considerably. Thanks for the idea! ... View more

@dbd @it will work. It’s what I use. You just need the api key.  And org id. You can run this from idle or any other ide you want.  ... View more

This was a cloud-based change, does not require any firmware changes. ... View more

Just curious, what model of camera do you have and is the "restricted bandwidth mode" setting enabled or disabled? ... View more

We just pushed a change that allows an array of orders / serials / licenses via the claim endpoint directly! Docs will get updated but if you want to try it out now, here are the supported parameters (notice they are now plural, and formatted as an array): https://dashboard.meraki.com/api_docs#claim-a-list-of-devices-licenses-and/or-orders-into-an-organization #wishgranted 😉 ... View more

While great progress, it would be ideal if this was also work with configuration templates. ... View more

Thanks a lot for the link. Good to have a new webinar soon. ... View more

For those interested in the latest and greatest on our APIs, bookmark this for a comprehensive API changelog! https://create.meraki.io/whats-new/       - Tony PM, API & Developer Ecosystem   ... View more

Hi @bowersjj,   The sandbox is alive and well! Check it out here, search for "Meraki": https://devnetsandbox.cisco.com/RM/Topology ... View more

Hi Tony I have some mobile applications for the Z3. If we do not use the Poe capability, what specification power supply can we use? Thanks ... View more

Thanks, Nathan. I will give this a read and will try to setup OSPF between the two devices. Thanks! ... View more