Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About MattPainter
MattPainter
Here to help
Member since Feb 28, 2019
Mar 12 2020
Matt Painter
North Dakota
Community Record
8
Posts
0
Kudos
0
Solutions
Badges
Mar 12 2020
2:32 PM
Yes. It is not yet on the official Azure supported hardware list but it does work.
... View more
Feb 3 2020
7:33 AM
I need to do a packet capture for voice traffic from a couple VpIP phones from site A to site B. Only one of the sites has a PRI for outgoing calls so all the traffic for branch offices goes over WAN. The internal extension dialing has been hit/miss so I want to do a packet capture on the MX64 as well as site B MX64. Is it as simple as configuring a packet filter for host 1.2.3.4 at each site to capture that traffic?
... View more
May 16 2019
10:02 AM
Firstly this is for budgeting and initial planning... Customer has a new 100k sq/f warehouse about 300x300 floor plan. Ceiling in spots is 20-30ft, mainly storage facility. This is not quite built yet, so i cant do site survey. Need wireless for barcode scanners/phones. Been some discussion on using MR 74's with the omni's below was the original bom...... 14 x MR74-HW 28 x MA-ANT-20 I ended up shooting for about 23x MR52's Looking for community advise for warehouse deployments... open to suggestions....
... View more
Apr 19 2019
7:24 AM
Its a larger 40AP environment varius TX powers throughout the day. MR33 in each room. Phones do not support FT, only pay nice on 2.4 as well. Ascom I 62 is the model. They started dropping connection to the PBX and messaging server. All i know is that the SNR for the client is usually perfect, and ICMP from AP to phone never drops. Also the wireless health is pretty solid, no spectrum concerns. I have tried multiple authentication methods, even open nothing changes.
... View more
Apr 19 2019
6:43 AM
Deployed a large MR system, out of 500 clients 20 wireless phones have connectivity issues, appears to only be to the pbx. Yet the vendor is stating they have SNR issues, that i need to manually configure TX power on AP's. Just looking for communitys thoughts on manually messing with Tx powers, i assume a site survey would need to be done regularly to adjust settings.
... View more
Apr 12 2019
1:33 PM
I got the beta update 15.13. Now I need to find some setup directions for route based VPNs. I hope to try it out this weekend.
... View more
Apr 1 2019
9:19 AM
Issue required reconfig on PBX, UNITE and something called an Xgate. Ascom I62 rely heavily on DTIM, meraki being default of 1 killed battery life.
... View more
Feb 28 2019
1:00 PM
Two new deployments with MR 42/33/52's Having issues with both Ascom I62, and these specralink 8440. I see there is a compatibly cert report for both vendors here. https://support.spectralink.com/sites/default/files/resource_files/721-1013-000.pdf https://www.ascom-ws.com/AscomPartnerWeb/Documents/Interop/_WLAN/Meraki/i62_Meraki_MR33-42_MR-25-9_final2.pdf Yet, these reports are really bland. I mean nothing in either that really assist.... Both phones have issues of dropped calls, one way audio etc. MR is on firmware 25.13 Point here is to obtain info from anyone in the community that can offer advise or to post my findings when/if I get a solution to document it somewhere for all you folks.
... View more
© 2024 Cisco Systems, Inc.
