I setup 2 dashboards one works perfectly, and the other one goes through the redirect process then Just lands on the Meraki page with a dialog that says "TRUE" and never goes to the dashboard, Test from the Azure portal are all Green. Thoughts or suggestions?
... View more
No usage was low about 55 endpoints only less than 15 users. We utilize larger Routers only because our backend internet connection was 1GB.
... View more
Just to recap on this Thread, the issue was Memory Utilization in my case only solution was to update the router to next model up. We are up and running again.
... View more
I also have this blank box issue, but its rare the Bigger issue is Previously we could sign into the VPN disconnect and than reconnect and it would just connect again. NOW it not only prompts us each time the username field is blank. so y ou has to type in user and then select the MFA option. We noticed this a few weeks ago. I would prefer the browser cache and use that token but this feature seems to be lost, Any one else notice this behavior?
... View more
Somehow the guest traffic must be blocking NFS and PPTP traffic. which is how wifi calling creates a tunnel, this is what I have in my notes, and I fixed the issue when I was using pfsense as my router
... View more
I changed nothing and speeds were so bad I complained to ISP, they came to the house put on equipment and confirmed there were no issues with Light. I put the 2nd router on the same ONT (Frontier allows 2 IPs) the one would get 1000mbs downloads, and on the MX I get 300MB on a good day. White papers state I should get 650ish so I complained.
... View more
8443 and I believe I changed that in the URL link in Azure, this is mostly working for me now and I have even implemented in Prod and no one is complaining.
... View more
I have tried every combination, currently, it's Prevention/Connectivity, I thought detection / balanced would help but the only way to get anything over 350x350 is to disable it. Even the White Paper KB says the router should do 650MB with all rules enabled. This is not the case for us here.
... View more
Running 17.6, When we got the 1gb service our speeds were fine for about a month, then I noticed the slowdown thinking it was ISP issue I had them come over and test, and it was not their side of things. took bit of time to figure out it was the rules, although they have been in place for year only recently it slow down my network.
... View more
I have the MX100 white papers state this is a 750mb Router. although I can get speeds in the high 800's usually 850x850. Recently all my speeds went down to 350x350 and the only way to get back to my 800 ish speeds is to completely disable "Intrusion detection and prevention" I would like to know if anyone else has noticed recent slowdowns like maybe the Rules have changed. My MX100 should perform 650mb speeds with all Rules enabled but this is no longer the case. I even Tested another MX100 only to see similar results.
... View more
When I enable Intrusion detection and prevention, My MX goes to 1/3 speed instead of 900MB we get maybe 250MB bandwidth speeds. Has anyone else experienced this type of slowdown with Intrusion detection and prevention
... View more
I overthought the problem, when I replaced my dashboard KEY I did lose the +1 but the 5 free stayed, then I added my MT back to the network and it worked just fine. Thank you for the suggestions.
... View more
they mentioned i would need to create a new dashboard or something because applying the renewal removed them does that make sense? Its a minor thing to give up just a shame because I was using them. I will open a ticket after all the dust settles.
... View more
I also have MX100, we upgraded to 1GB Fiber, for over a month I was receiving 850x850 ish speeds. All the Sudden we are only getting 350x350 speeds now. If I disable AMP I can get the full speed again. Just wondering what has changed with AMP that all the sudden the Router cannot manage anything over 350mbs, has anyone else seen issue like t his?
... View more
I have renewed my entire Dashboard Licenses, all the MTs have vanished is there a method to get those licensees back I was currently evaluating 2 Open/Close Sensors.
... View more
So does Certificate Authentication work, because I see a note in the config that says it will use Certificate before STILL asking for user Credentials?
... View more
Just in case someone else runs into this, when your troubleshooting disable this in the firewall IP Source Address spoofing protection change to LOG if you have a dup subnet that worked in the past, the MX might think it's spoofing a subnet on the MX.
... View more
I was wondering if it got any better, waiting for the IPV6 Beta so I can get my MX100 off the Shelf and try it out again. I wasted over a year of licensing since we cannot use it due to the IPV6 limitations.
... View more
February Now Still sitting on the Shelf my pretty MX100 Licence expiring and it has 0 hours usage. Lets hope something happens soon, but if this thread is correct and Dual-Stack is not possible, that mean we have to replace all our current equipment?
... View more
//
//
LITHIUM.InformationBox({"updateFeedbackEvent":"LITHIUM:updateAjaxFeedback","componentSelector":"#informationbox_4889f83086824","feedbackSelector":".InfoMessage"});
LITHIUM.InformationBox({"updateFeedbackEvent":"LITHIUM:updateAjaxFeedback","componentSelector":"#informationbox_4889f83086824_0","feedbackSelector":".InfoMessage"});
LITHIUM.InformationBox({"updateFeedbackEvent":"LITHIUM:updateAjaxFeedback","componentSelector":"#informationbox_4889f83086824_1","feedbackSelector":".InfoMessage"});
LITHIUM.InformationBox({"updateFeedbackEvent":"LITHIUM:updateAjaxFeedback","componentSelector":"#informationbox_4889f83086824_2","feedbackSelector":".InfoMessage"});
LITHIUM.AutoComplete({"options":{"autosuggestionAvailableInstructionText":"Auto-suggestions available. Use Up and Down arrow keys to navigate.","triggerTextLength":4,"autocompleteInstructionsSelector":"#autocompleteInstructionsText_4889f7e053fde","updateInputOnSelect":true,"loadingText":"Searching...","emptyText":"No Matches","successText":"Results:","defaultText":"Enter a search word","autosuggestionUnavailableInstructionText":"No suggestions available","disabled":false,"footerContent":[{"scripts":"\n\n;(function($){LITHIUM.Link=function(params){var $doc=$(document);function handler(event){var $link=$(this);var token=$link.data('lia-action-token');if($link.data('lia-ajax')!==true&&token!==undefined){if(event.isPropagationStopped()===false&&event.isImmediatePropagationStopped()===false&&event.isDefaultPrevented()===false){event.stop();var $form=$('