Ok thanks for the explanations. ... View more

Yes, but that's what I'm talking about, to define the native VLAN with the 150 on both switches. ... View more

Just to be clearer, you can't access it using the default IP because you don't have the management port, but if your switch receives an IP via DHCP you should be able to access it using that IP. You already opened a similar discussion and this was explained there if I'm not mistaken. If you are having difficulties, I suggest you contact Meraki support. ... View more

Hi StevenPPAA,   Can you tell how did you access to the LSP on a 9200CX ? I try 198.18.0.1 directly connected to the switch but it seems not working....   Many thanks ... View more

Hello,   Thanks for your post,  unfortunately, absolutely nothing works. The reset procedure doesn't function, as if the "mode" button is disabled. I'm going to request an RMA. ... View more

I think I've identified the problem. I don't know why I'm getting this log entry when the switch starts up: SETUP: new interface Vlan1 placed in "shutdown" state SETUP: new interface GigabitEthernet0/0 placed in "shutdown" state Switch 1 has been registered SETUP: new interface Vlan1 placed in "shutdown" state ---> If my interface vlan1 placed in shutdown stae, I don't see how I can retrieve an IP address... ... View more