Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
- About Shawqy
Shawqy
Getting noticed
Member since Dec 4, 2018
11-09-2022
Shawqy Ahamed
Sri Lanka
Community Record
21
Posts
9
Kudos
1
Solution
Badges
12-09-2020
09:18 AM
As of I know, that we cannot configure. Anyways please check with Meraki support whether is there any ways to do the needful from backend.
... View more
07-09-2020
05:47 PM
I hope you can find the configuration under “SD-WAN & traffic shaping” and additionally, please check whether the bandwidth limitation is being done in any downstream network as well.
... View more
05-14-2020
03:33 AM
1 Kudo
Hi, It happens most of the time. I experienced this mostly.
... View more
05-14-2020
03:30 AM
1 Kudo
The Client view in Network Wide shows the entire usage of that particular network. Let say if u have only an access point, in that case, it shows entire traffic transmitted from the connected clients of that access point. It can be internet traffic, LAN traffic, etc.
... View more
04-23-2020
11:22 PM
Same here. I tested with MR, MX filtering and it has access for online sync as you said. Better to check with the Meraki Support
... View more
04-23-2020
09:52 AM
Check the DNS connectivity in that case. I face the same issue sometimes and I figured out that the ISP was facing some sort of Internet issue. Anyway, the MX won't lose Dashboard connectivity.
... View more
04-23-2020
09:47 AM
I wonder is that Android games are Online games?
... View more
04-22-2020
03:43 AM
1 Kudo
If it is an IPVPN connection, yes you can connect it to Port 1.
... View more
04-22-2020
03:42 AM
2 Kudos
You must use either WAN1 or WAN2 for the internet connection. If not MX couldn't connect to Meraki Dashboard
... View more
04-22-2020
01:20 AM
1 Kudo
I am managing a couple of Meraki networks including MR, MS, MX, MV, and SM so far with for now more than 600 access points. I am looking for an opportunity to gain quick knowledge of API to make my managing task much easier
... View more
04-16-2020
06:45 AM
Hi @CptnCrnch We are applying the IP Address once the authentication is done. So how could the Radius log have the IP Address + User ID detail? What I mean with Reliability is the options that are available for troubleshooting & management.
... View more
04-16-2020
06:29 AM
Hi there, We have a requirement to get the wireless event logs especially the 802.1X EAP Success & 802.11 Authentication via Syslog for an AD Based firewall rule configuration in a network. This is a large enterprise network where they mostly rely on wireless connectivity for daily operations. Please provide your feedback on the reliability of Sysog services in Meraki if someone has experienced it. Thanks in Advance
... View more
04-07-2020
11:33 AM
No Sorry. I got support from CX - AD Team, who is responsible for it.
... View more
04-07-2020
11:24 AM
1 Kudo
Welcome, I haven't integrated an Azure AD with Meraki but I have integrated a couple of Azure Radius Servers (NPS) with Meraki and it works.
... View more
04-07-2020
11:19 AM
Correct, it requires an Azure AD subscription. If you don't have one, try to integrate the O365 with Radius Server. I don't have an idea, how to integrate O365 with a Radius Server with but hope it is possible.
... View more
04-07-2020
11:15 AM
There are authentication methods available like RADIUS and AD Login. Please try to add Azure AD there. Else, try to configure an NPS server and integrate it with this.
... View more
04-07-2020
11:10 AM
1 Kudo
Create a TAG for AP under Wireless > Access Points (Only on the Access Points that you need to enable the SSID) Go to Wireless > SSID Availability, Enable Per-AP Availability and select the TAG that you created.
... View more
12-06-2018
02:52 AM
Thanks for your response. Is there any idea of num_eap= value?
... View more
12-06-2018
02:48 AM
Thanks Peter. There is a requirement for Lower devices
... View more
12-04-2018
10:51 AM
We have configured 802.1X authentication for a corporate SSID. Wireless health shows that there are some Authentication failures. If shows that the authentication has failed along with some attributes and values. Is anyone have idea on this attributes? (I need to know the highlighted fields) type='802.1X auth fail' num_eap='0' associated='true' radio='1' vap='0'
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 3448 | 04-22-2020 03:49 AM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 2 | 3458 | |
| 1 | 2203 | |
| 1 | 1110 | |
| 1 | 3448 | |
| 1 | 3457 |
