Hey Suraj,  "script" is probably a bit strong - But this is the list of commands I literally manually copied and pasted into every single switch we off boarded from Meraki Monitoring 🤣   Obviously, adjust as required - Thankfully 99% of our switches had the exact same configuration left behind during Cloud Monitoring off boarding, so it was very easy to copy and paste the same configuration without having to double check.    ! ! Clean up configuration no aaa authentication login MERAKI local no aaa authorization exec MERAKI local no aaa authorization commands 0 MERAKI local no aaa authorization commands 1 MERAKI local no aaa authorization commands 2 MERAKI local no aaa authorization commands 3 MERAKI local no aaa authorization commands 4 MERAKI local no aaa authorization commands 5 MERAKI local no aaa authorization commands 6 MERAKI local no aaa authorization commands 7 MERAKI local no aaa authorization commands 8 MERAKI local no aaa authorization commands 9 MERAKI local no aaa authorization commands 10 MERAKI local no aaa authorization commands 11 MERAKI local no aaa authorization commands 12 MERAKI local no aaa authorization commands 13 MERAKI local no aaa authorization commands 14 MERAKI local no aaa authorization commands 15 MERAKI local ! ! config t line vty 32 35 no access-class MERAKI_VTY_IN in no access-class MERAKI_VTY_OUT out no authorization commands 0 MERAKI no authorization commands 1 MERAKI no authorization commands 2 MERAKI no authorization commands 3 MERAKI no authorization commands 4 MERAKI no authorization commands 5 MERAKI no authorization commands 6 MERAKI no authorization commands 7 MERAKI no authorization commands 8 MERAKI no authorization commands 9 MERAKI no authorization commands 10 MERAKI no authorization commands 11 MERAKI no authorization commands 12 MERAKI no authorization commands 13 MERAKI no authorization commands 14 MERAKI no authorization commands 15 MERAKI no authorization exec MERAKI no login authentication MERAKI no rotary 50 transport input none !     ... View more

Just to clarify, I have confirmed the following prerequisites have been met   Prerequisites Uplink connectivity (from the switch to the cloud and not connectivity to the computer being used) must be via a front-panel port (not the management interface). ✅ Only the default VRF is supported. ✅ Ensure routes are in place to reach external addresses including a default route (use of ip default-gateway is not supported). ✅ IP routing (ip routing) must be enabled on the switch. ✅ AAA on the switch must be configured using aaa new-model. ✅ aaa authentication login default local and aaa authorization exec default local must be configured. ✅ The user account for onboarding must have privilege-15 level access on the switch. ✅ The Meraki Tunnel only supports the Global VRF. ✅ Domain Name Lookup is required for hostname resolution to the Dashboard Registration and Meraki Tunnel services ✅ ip name-server {Domain server IP address} ip domain lookup The switch clock must reflect the correct current time in order to establish a mutual TLS tunnel with the Registration and Meraki Tunnel services by enabling NTP services. ✅ ntp server {ntp server IP address} Our C9300 and C9500 are both licenced with Advantage licencing. ✅ ... View more

Just did some testing, and yep, it does! Very good to know about that trick.   I'll be honest, I've just never tried looking for clients in other networks, just used it to find clients in the network I was looking at.    Thank you 😄  ... View more

If you go Organisation/Overview you can see a map of all your devics, which ones are alerting, and which ones are down.       This allows you to quickly see if an outage is related to a geographic region or is widespread.     ... View more

Really? I have never seen it on any of my Orgs when adding MR, I just double checked as I added one within the last month and there is no recently added tag.  ... View more

aaa new-model aaa group server tacacs+ GROUP_TAC server name TAC-AUTH1 server name TAC-AUTH2 aaa authentication login default local group GROUP_TAC aaa authentication login MERAKI local aaa authentication enable default enable group GROUP_TAC aaa authorization config-commands aaa authorization exec default local group GROUP_TAC if-authenticated aaa authorization exec MERAKI local aaa authorization commands 15 default group GROUP_TAC if-authenticated aaa authorization commands 15 MERAKI local aaa accounting update periodic 3 aaa accounting commands 15 default start-stop group tacacs+ aaa session-id common ... View more

Take me the chance to win someday 🥲✨😹 ... View more