Goodday,   Is it possible to use a radius server that is not accessible trough the internet?   Currently I have a HUB with three SPOKES. The Hub is connected to a LAN with port 2. The next hop is a customer FW through which all traffic is routed. Behind that firewall is a raduis server, 10.11.1.7 & 10.11.1.8 port 1500 (fictional).  Both adresses are reachable via ping.   According to the Access Controle page the radius server should be accessible from the internet. That is possible.   Is there another ways clients of the SPOKES can log on via radius? ... View more

Hi, I have a problem wit two Mx67 not talking to eachother.  The VPN status is red and I'm not receving routing information from the HUB. The Hub MxA is connected and working. It has 1 VLAN, VLAN 10, with subnet 10.250.0.0/29, enabled on VPN It also has a statis to 10.250.0.1 which is reachable.    The spoke MxB is connected to the internet and also has a VLAn, VLAN10, with subnet 10.250.1.8/29 There are no static routes. I would like to route all traffice through the HUB, but that doesnt work.    In the VPN Status overview the connection is red and I cannot see subnet 10.250.0.0/29 in the ARP.  Am I missing something?  ... View more

Hi all, As a new Meraki user I was wondering how to change the subnets after cloning a network.    Under an existing organisation I'm building a new site (network) and cloned my example network. But when I try to change the subnet, I keep getting error that the DHCP settings are not in the range. When I try to change the DHCP, its not in the range of VLAN.    Is there a way to change the subnet without having to delete what I wanted to clone? They are not online, so only a warning would be enough so I could fix the issue, now I can't save and see no other option then deleting the vlans and start anew..   Am I missing something? Edit: I removed the DHCP reserved range and could then change the VLAN subnet. Is that the only way? ... View more