Hello GC1, A few questions to get a better understanding of the issue. Is your GX50 getting a public IP address on its WAN interface or a private IP address? Hardware > GX50 > IP address Is the remote client getting an error when attempting to connect to the client VPN? If it's a Windows device, can you provide the error code generated in the Windows Event viewer of the connection event? On the affected device, press the Windows key and type Event Viewer. From the search results, click on Event Viewer. In Event Viewer, navigate to Windows Logs > Application. Search the Error events for the connection failure. Click the event to review the associated error code and details. For clarification, the DNS configuration is used to resolve DNS queries when connected to the client VPN. If you know the DNS server addresses (two different public IP addresses) of the DNS servers you are planning on using, you can enter them using the Custom DNS provider option. Otherwise, we recommend using Google DNS by default. Additionally, the subnet field needs to be entered with a different subnet from the subnets you are using on the local networks (different from the networks listed in the Networks tab of your Meraki app). Lastly, you can only connect to the client VPN from a remote network. If you try to connect to the client VPN while on the same network as the GX50, then this will cause errors as client VPN connections are meant to be connected remotely. Best Regards, .ılı.ılı. Tony Meraki GO Technical Support
... View more
