Congrats to all the Monthly winners; Especially the new members that have made the list,  It's great to see the community expanding! I'm fizzing to get my hands on some more Meraki SWAG! ... View more

You'll have to supply some more information. As per @PhilipDAth's reply this clearly specify's what's required from a configuration aspect, the only difference is you'll have to configure the 3 VLAN's rather than 2? ... View more

This can't be done. This does defeat the purpose of cloud management IMO.  However, I'd recommend making a wish via dashboard, allowing someone to disable the packet capture from the local status page of a device could a good addition IMO. ... View more

I'd stay away from splunk. If you're looking to archive event data and take advantage of big data, data correlation and data warehousing with a true cloud solution (like Meraki) have a look at https://www.sumologic.com/. ... View more

Ok, so looking at your Configuration you have a VLAN terminating (Default gateway) which is on the fortinet. 192.168.20.254/24. The AP's and Syslog are all in this VLAN -   AP's 192.168.20.1/24 192.168.20.2/24 192.168.20.3/24 192.168.20.4/24   Syslog 192.168.20.253/24   If this is the case, what mode are you using for the Guest SSID? I assume with this arrangement you'll be using Mearki NAT mode? As this would be the only way you provide true segregation for Guest traffic as per your proposed design?   What is the firewall rule policy on your Fortinet and what does that refer too? (Attachment 4) you've uploaded?   ... View more

You could also look at deploying the vMX100 inside a Azure VNET. I've not done it with Azure however have set it up within AWS. It's pretty simple,  just requires VPC with a IGW created and then subnets behind the xVM100, just change their route tables to point to the interface of the VMX100. I can imagine the setup is identical in Azure just with the Azure equivalents.    If you're looking at deploying quite a few Meraki sites, rather than having to manually create VPN's from each of them an vMX100 and Auto-VPN would be the way to go. otherwise if it's a small amount, I don't know if you'd be able to justify the cost (vMX100 license, running costs) etc as effectively it's just working as a VPN concentrator. ... View more

I can't see anything out of the ordinary from your configuration, this all appears to look fine. I assume you've applied the syslog server settings to the correct network which the AP's are in? I assume they're Management IP's are the ones you've got listed in the .Conf file?   Have you tried taking a packet capture from the switch interface that the Syslog server is connected to? This will allow you to see if syslog messages are even hitting the server.   ... View more

If all the client devices are behind the MX/Device gateway performing NAT, just put all the clients into a specific VLAN and then create a group policy on that VLAN to be routed out of the WAN 2 uplink (Which has the specific whitelisted public IP).  ... View more

I'm also waiting for the IPSEC encryption type of NULL to be supported 😞 ... View more

Hello,   Firstly; Do you have DFS channels enabled for your wireless environment? - https://documentation.meraki.com/MR/Radio_Settings/Dynamic_Frequency_Selection_(DFS)   Check to see whether the AP in question is reporting DFS events which would cause all clients to disassociate/re-associate to the SSID as the channels change.  If this is the cause, exclude DFS channels from your wireless environment.    Tell me how this goes; If you're still having issues after this we may have to look at the RSSI for these clients/configuration of the SSID. ... View more

Hello Doug,   Take a look at this article on traffic shaping for SSID's. - https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/Traffic_and_Bandwidth_Shaping.   In regards to recommendations for settings there's not really any specific defacto standard and would more or less be configured as per your business/traffic requirements. My recommendation obviously would be to Prioritise business critical applications (Office 365, Google Docs, Any VoIP traffic.)   Let me know how you get on/if you have any questions. ... View more

Hello Doug,   Take a look at this article - https://documentation.meraki.com/MX-Z/Monitoring_and_Reporting/Bad_IP_Assignment_Configuration. My assumptions is that you're either putting in the incorrect default gateway or alternatively if you're using the Native VLAN for management don't bother with putting in VLAN information for the static assignment.   Hopefully this helps you out - Let me know how you get on. ... View more

Depending on how many ports you're after you might want to ask about the MS220-8P. As per @PhilipDAth's comments reach out to your Meraki sales rep, they'll be able to sort you out. ... View more

You'll have to provide some more information for us to help you out. What are you trying to achieve?  ... View more

Thanks for this information @CarolineS 🙂 ... View more

Phillip's got it sorted. Either a layer 3 concentrator VPN SSID or alternatively installing all AP's across different in the same wireless network will allow users to roam between the same SSID when visiting different sites.  ... View more

Congrats to everyone! It's nice to see that the Meraki community is starting to grow. ... View more

This is a valid point. However what's to say that other vendors don't the same however mark the release as being "Stable" even though it's very much a beta release?  ... View more

It's been said for a while that they are trying in integrate the Cisco Any-connect client into the Meraki portfolio. I could imagine this issue is costing them quite a few wins so I assume it'll be soon to be released. ... View more

There's no specific settings that need to be configured to allow the device to associate to the Meraki SSID. What are the problems you're having? Some more contexts around the issue/errors being presented would help us to help you.   ... View more

We still seem to have ongoing issues now on 25.6. We are running MR32's - Probably time to engage support however I'm assuming it's related to the 2.4ghz Radio issue reported in the caveats  ... View more

Do you have a different switch available? - Try the cable and AP in another switch and see if CRC's are still reported - Could be a faulty switch.  ... View more

I've not setup any Geofencing policies. I'd recommend having a look at this knowledge base article which provides some great steps with setting geofencing - https://documentation.meraki.com/SM/Tags_and_Policies/Geofencing_with_Managed_Devices ... View more