Is there a performance hit ( what is the impact)   Traffic analysis Basic : collect generic traffic categories vs Detailed : collect Destination Host names   Can someone share a link to what the 2 views look like? I currently have the system configured as Basic ... View more

I plan to upgrade my MS devices. (320s and 410s)   I run  basic VLANS and AGGR in the BEST Practice Core stack Aggregation design   Can I jump from a  12 straight to a 14?   Is there a concern regarding updating stacks?     ... View more

  On an idle network ( early mornings).  Some users say the WIFI is slow. We are 1 freeway exit away from an airport.   One users says it seems slow when he is on a DFS band   What is the other wifi managers  experience to disable DFS band selection? ... View more

I have WAN1 and WAN2 I have 1 host  192.168.10.10 inside my network that  transfers fils to Google cloud storage.    I would like to configure to send all internet egress traffic from 192.168.10.10 out WAN2. If WAN2 fails ( HARD DOWN). use WAN1 ... View more

My current client vpn configuration uses 192.168.0.0/24. I want to change that assigned subnet. The setting area states refer to layer 3 subnet. but 192.168.0.0 is not listed. Is there a simple guide to MAINTAIN every setting however just change the subnet to 192.168.250.0 or some other RFC1918 address? ... View more

MX250 running DHCP Our lease for a subnet is 24 hrs A host was on subnet 1 and has an assignment I want it moved to subnet 6 via a tagged interface with VLAN6 set to native   It continues to get allocated the VLAN 1 IP address.   can you flush an entry?       ... View more

I have a SSID VLAN/ SUBNET  / DHCP pool (/4). an isolated environment The SSID supports 2.4 and 5GHZ some legacy devices per the vendor should be on 2.4 only.   Is it possible to create a new SSID ( supposedly Meraki support can enable 2.4 only config). that uses the same VLAN and DHCP pool.  I do not want to separate  these devices since they communicate to other LAN based systems on that VLAN for monitoring   Thanks ... View more

When doing a hardware upgrade you are sitting on the inside of your network   When you remove the 2 MX 84. does the network still work  for you so that you can add the MX250?     I am pre configuring my MX250 a.a.a.64/29 a.a.a.65(ISP) a.a.a.66. (MX250 local config) a.a.a.68  (MX250 future spare local config).   So   remove both MX84 add 1 MX250 ( I know to use similar ports then migrate to the SPF+ later)   Create the spare with a virtual config add the second MX250   Remember to turn on VPN HUB.   This is just a rough start for migration  but I am concerned how long I have before I have to. run and find a guest wifi ssid to add my MX250 since I deleted my MX84s. ... View more

We wish to direct Google Cloud storage across an ISP ( setting Bandwidth metering) Share Google Cloud Storage across both our ISP ( setting Bandwidth metering) Schedule Bandwidth metering across s time of day and day of week Is Google cloud a predefined SD WAN APP. Our storage has Google Cloud Storage predefined. In summary 1 internal IP transfers up to 1 GIG. to GCS. ... View more

Hello,   In Cisco IOS. there is a setting called   int Gi/0/0 switchport host   In JUNOS. you set the port as EDGE.     This basically removes all extra settings not needed for a port that has a single vlan and a basic client PC.   Specifically it  set spanning-tree portfast. setting portfast removes any RSTP participation and eliminates uplink MAC-FLUSHING which impacts your network .     I am seeking what others do as a best practice if familiar IOS as well JUNOS ( ,making a Port basic) settings ... View more

I have a legacy VPN I wish to disable or remove.  I believe I have the correct rights to do so but I do not see the remove / delete/  or disable option ... View more

The 4 uplink ports are labeled SFP + and using an SFP+ optic they light Green When Using an SFP they light orange. Is there an issue  with using an SFP 1GIG optic?   I do not see any documentation statin it is  not compatible?     Thank you ... View more

Current config Security and SD-WAN Routed/NAT 2 ISP SDN BALANCED I see Traffic on both my ISP interfaces If Traffic is SD-WAN balanced What IP does the internet destination see leaving out ISP-A What IP does the internet destination see leaving out ISP-B Is there a way to see the traffic flows? ... View more