securing Port Forwarding and NAT Rules on the MX

Solved
JED2021
Getting noticed

securing Port Forwarding and NAT Rules on the MX

https://documentation.meraki.com/MX/NAT_and_Port_Forwarding/Port_Forwarding_and_NAT_Rules_on_the_MX

 

is there a way   for both wan 1 and wan 2 to permit  only a specific host or CIDR to access the port forwarded policy.

 

This is a good article but does not mention a source IP

 

Thanks 

1 Accepted Solution
PhilipDAth
Kind of a big deal
Kind of a big deal

2 Replies 2
KarstenI
Kind of a big deal
Kind of a big deal

You can specify which sources are allowed to use the configured NAT rule. It's also shown on the mentioned document with "remote IP".

PhilipDAth
Kind of a big deal
Kind of a big deal

PhilipDAth_0-1652220424749.png

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels