I don't understand, are you trying to set a static IP on a Zebra device to try to connect to a network where the mandatory DHCP is enabled?   If so, it is normal for the connection to drop, the WLC itself works that way. ... View more

Can you share the configuration with us? Just make sure that the address and subnet mask are configured correctly in the SVI of the gateway and DHCP server. ... View more

Good question, I think only the product design team will know how to answer. ... View more

The MX 600 was discontinued and replaced by the MX450. Both have equivalent characteristics, https://meraki.cisco.com/lib/pdf/eol/meraki_eol_mx400_mx600.pdf https://meraki.cisco.com/product-collateral/mx-family-datasheet/?file https://www.cloudwifiworks.com/MX600.asp ... View more

It's a little old but maybe it can help you.   https://community.fortinet.com/t5/FortiGate/Technical-Tip-Block-Telegram-App-and-Web-on-FortiGate-FortiOS-6/ta-p/215034 ... View more

It is recommended to always prune unused VLANs, this reduces the amount of unnecessary traffic and bandwidth consumption on the trunk link, as well as the security risks of exposing VLANs to unauthorized devices. ... View more

Have you tried this one?   https://developer.cisco.com/meraki/api/get-organization-inventory-devices/ ... View more

How many devices do you have?   ... View more

I suggest you open a support case. ... View more

E a outra opção seria sem radius mas ai teria que usar splash page.   https://documentation.meraki.com/MR/MR_Splash_Page/Using_a_Sign-on_Splash_Page_to_Restrict_Wireless_Access_by_MAC_address ... View more

Sim e não, você consegue fazer autenticação usando o MAC mas precisa do servidor Radius para isso, ou seja nativamente igual em uma WLC não é possível.     https://documentation.meraki.com/MR/Encryption_and_Authentication/Enabling_MAC-based_access_control_on_an_SSID     ... View more

Both, I am personally very cautious with new versions of MX as I have faced several problems in the past, which is why there is a LAB network to carry out validations. ... View more

This version is not stable yet. ... View more

Another question, you are not setting any VLAN when you configure the static IP on the printers, right? ... View more

Who is the network's default gateway (ie: an L3 switch, an MX?). ... View more

So make sure you have configured the correct Gateway on the printer.   Troubleshooting VLAN Printer Sharing Issue on Meraki Network - The Meraki Community ... View more

Mandatory DHCP Mandatory DHCP requires client devices use DHCP for IP assignment. All 802.11ac Wave 2 capable MR access points running MR 26.0 firmware or later support this feature. Enabled: Wireless clients associated to an AP (either new associations or clients that roamed from another AP) that have not requested a DHCP address are placed in a blocked state and are not able to send any traffic on LAN and WAN. Disabled: The default setting for this feature. Wireless clients configured with static IPs are not required to request a DHCP address.   https://documentation.meraki.com/MR/Access_Control#Mandatory_DHCP ... View more

It's connected across WiFi? ... View more

Have you checked this link?   https://documentation.meraki.com/MG/MG_Best_Practices/MG_Wireless_WAN_Dashboard_Settings#Traffic_Shaping ... View more

In the MX you can configure a VLAN to authenticate via the Portal, but you still cannot use the Portal on your WLC.   Either you use the Meraki portal or another external portal, such as Cisco ISE for example.   https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Splash_Page#MX_Splash_Page_Options ... View more

You cannot make a Meraki Access Point register with a WLC. Meraki APs are managed exclusively through the Meraki dashboard. ... View more

What do you mean by other devices?   You can simply remove the old MX and add the new one to the current Network, as long as you do it within a maintenance window.   Removing the MX will not cause you to lose your settings. ... View more

Take a look at the documentation.   https://documentation.meraki.com/MX/Client_VPN/AnyConnect_on_the_MX_Appliance/Managing_and_Troubleshooting_AnyConnect_Certificates ... View more

You can clone the network. https://documentation.meraki.com/General_Administration/Organizations_and_Networks/Cloning_Networks_and_Organizations_in_Dashboard Cloning Network Settings with Configuration Sync Sometimes it is convenient or necessary to copy configurations from one network to another. If an Organization has multiple networks, it is possible to copy an existing MX or MR network configuration to another network. For MXs in particular, the traffic shaping and content/security filtering (threat protection) settings can be copied. ... View more