That's how I have to handle my environment due to the sheer density of clients we serve, which is a school environment. ... View more

You said it often is when the client is in a room without an AP, but does it do so when its in a room with an AP also? ... View more

Are the switchports configured to use Meraki Wifi since migrating?  Since you are coming from a Cisco WLAN controller setup. ... View more

Having them hug the wall, even if the math works out, seems like it would introduce problems with far end clients potentially reaching for an AP not in their physical room. (which has happened to me in my environment).  That being the case, I try to center the AP in each classroom as I come across them. ... View more

Maybe not related at all, but we have some Android powered Promethean boards here that absolutely will not work well on the 40Mhz channel width.  If I switch the 20 they work perfectly, regardless of the fact that the documentation states it works on 20/40/80.    And it seems to be just with Meraki APs. ... View more

I was hoping to enable this feature but I may wait a bit now, until summer anyway. ... View more

I'm showing a 27.4.1 also............MT beta patch.   Odd ... View more

We just got a trial in that will be installed in our main data center for testing purposes.    Fingers crossed it works as expected. ... View more

I'd definitely consider having an AP in every classroom with that kind of density and traffic requirements.  There may be more going on but I feel like your current load and environment would benefit from this..........if its possible that is. ... View more

Due to the current Covid situation are you doing more traffic intensive wifi applications, such as zooms, than you did before?   I'm also working in a school environment and our wifi is pretty rock solid, but I've seen issues in some locations where I had very high client density that previously had no issues but now due to google meets, etc on every chromebook experience some delays.    50-60 clients on an AP, going through a wall, and doing some of this type of traffic might be an issue.   ... View more

How much higher density?   And does the problems only affect the staff connection and not the student connection? ... View more

@AldoCar    He is correct, 'best' doesn't' always mean closest but no, disabling this did not affect clients roaming from room to room in my setting, which is a school environment.     My scenario was a typical classroom setting and the AP would kick clients off after say, 20 clients attached and try to move them over to another AP, even if the traffic going over the AP wasn't detrimental.  Once I disabled it clients would stay on the AP in their classroom.    Again, this was just my experience and it has been some time since this was first introduced so the issue may be resolved now but its still disabled in my networks.     ... View more

It may have been mentioned, and I know it was an issue in the past so it might still be.........but the 'client balancing' option in the radio settings has caused me issues previously.  The AP would kick some clients over to a neighboring AP even if the current AP really wasnt overloaded.  Once I turned that off my problems went away. ... View more

So its safe to say that 26.8 is safe to upgrade to 🙂 ... View more

Does your wifi card have requirements that your SSID is not providing?   20/40/80MHz, etc? ... View more

The issues are a long story is what I mean.  Peer to Peer, if we use the Meraki built in DHCP on the SSID it disallows P2P from working, so things like Apple airplay and such do not function. ... View more

Have you updated to 11.31?  Have you noticed any change if so? ... View more

^ I'd be interesting in seeing if that high CPU continues, and that does seem like it could cause the port flap issue.   I wish we could see that in the dashboard. ... View more

Similar issue, when the port STP changes occur on my uplink port to the WAN it takes the whole network down.  It triggers a power supply removal/inserted error eventually like the switch was rebooted (but it physically wasn't)   It's happening at 3 different locations so highly doubtful a real hardware issue and power has been verified to be good. ... View more

Any update on this?  I'm having this constantly at a few of my Meraki locations and am currently in dialog with support on the issue.   As of yet no resolution but the exact same issue.  Computers really don't notice but every phone reboots and of course I get tons of calls.   The only way I honestly even know is I get an alert from the UPS management system telling me the UPS lost contact briefly.   I've verify power is not the issue. ... View more

@FodFar I am running 11:30 but experienced it on 11:22 as well. ... View more

To clarify, these symptoms only occur if the L3 switch in the network is in a stack?   I seem to have similar situations but without the L3 being in a stack. ... View more

I had something similar show up just yesterday. The remote end of the cable had a netgear switch attached, mind you it was a defective Netgear switch. once removed it tested fine ... View more

I've upgraded a couple of sites to 26.6.1 with no apparent wifi issues so here's hoping that remains as I'd like to move the remaining over to that version as well. ... View more