I just tested it with Postman and it works. I have an environment setup where baseUrl and networkId are already setup (Info here: https://create.meraki.io/build/meraki-postman-collection-getting-started/).   So the only thing I needed to do was double click the call in the collection so a new tab opens in postman for that call. Then below go to the "body" section and fill in the needed data ( "mac", "name", "devicePolicy"). In this case because I only wanted to change the name I set devicePolicy to "normal".   This is what that looks like: ... View more

Is there anything else on that log entry? Seems incomplete... ... View more

I know that @MerakiDave was in contact with the MS and support teams regarding a similar issue. Perhaps he can post back. The topic I'm referring to is this one: https://community.meraki.com/t5/Network-Wide/Network-topology-is-not-updated/td-p/27174   I'd open a support case anyway. LLDP enabled or disabled should only result in the catalyst being shown or not and in my opinion shouldn't have an impact on the rest of the topology. ... View more

The MX100 has a dedicated management interface to access the local web page, but I think you can also access the local webpage when you have L3 access to the LAN IP of the MX. For that you'll have to set " Remote device status pages" to "Enabled" in Network-Wide > General.   The docs specify the following: You can toggle the LAN2 port between LAN and Internet, through Uplink configuration under the Local status tab.   Source: https://documentation.meraki.com/MX/Installation_Guides/MX100_Installation_Guide   So only LAN Port 2.   ... View more

So your issue is also with step 4 of the process? Same error? ... View more

So you have a trunk with all vlans allowed on port 1, and if you set another port to access for any vlan other than 1 your device doesn't get an IP address?   What DHCP server are you using? Is it correctly configured for the vlans? How is the setup? Trunk to the DHCP server or are you using relay? ... View more

Ooohhh I love this... Monty Python will be hard to beat. But it's short so maybe a playlist is needed.   Maybe some of these: The Beatles - Help Eric Prydz - Call on me David Bowie - Space Oddity Adele - Hello Pink Floyd - Is there anybody out there Tenacious D - Best song in the world ... View more

@PhilipDAth The SG run standard RSTP not PVST or PVST+. So their RSTP is identical to Meraki's hence why I would prefer to use standard RSTP ... View more

I'm afraid it's not possible to configure the ports on the MR30H as a trunk. They're meant to be used for clients. Hence the port to ssid mapping to make them part of a single ssid/vlan.   Maybe there's a hidden feature that support can enable but I doubt it.   My advice would be to pull an extra cable. ... View more

Here's the recommended configuration for non Meraki switches: https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Recommended_Configuration_for_Trunk_Link_to_Non-Meraki_Switches   I believe the vlan configuration commands on the SG series are the same as catalyst, but you can check here: https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-small-business-300-series-managed-switches/smb4986-vlan-configuration-via-cli-on-300-500-series-managed-switche.html   Then there's the aspect of spanning tree. Meraki doesn't support MSTP so it's best to stick to standard RSTP: https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Configuring_RSTP_for_interoperability_with_3rd_party_switches   I have a feeling your new Meraki switches are quite central to the network so they're likely good root bridge candidates.   Cli config of RSTP on the SG500: https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-small-business-300-series-managed-switches/smb5760-configure-stp-settings-on-a-switch-through-the-cli.html   Hope that helps! ... View more

So if I understand correctly you want to setup an ssid on which users normally have to pay to access it and you want to give them free access for an hour.   If that is indeed what you want to do go to access control of your ssid (wireless > access control). Set the association requirements to open. And the splash page to billing.   Then scroll down and enable the free access for 60 minutes per day.   If you scroll down even further you can define the pricing after the free hour.   Once you save the settings on this page and enable the ssid, the Wireless > Prepaid cards page will become available where you can create extra vouchers for more free access.   More info here: https://documentation.meraki.com/MR/Splash_Page/Billing_for_Wireless_Access   ... View more

Not exactly what you're looking for but it would be cool to have metal detector events combined with automatic snapshot taking via the new snapshot api. Interesting use case.   https://meraki.cisco.com/blog/2019/03/introducing-the-mv-snapshot-api/   A step further would then be to have those snapshots analysed by third party image recognition looking for weapons. ... View more

Apart from what @PhilipDAth already said about the radius accounting... There are also client VPN log entries in Network-Wide > Event log under the security appliances events. There are events when a client connects and disconnects and when the SA is deleted. Maybe you can use that and calculate the duration from it.   Unfortunately I don't think there's a cleaner way atm. Do send in a Make a wish for it! ... View more

Have a look at the dashboard api: https://create.meraki.io/build/meraki-postman-collection-getting-started/   I think it can handle all of your points.   Keep in mind that this means that the devices should have cloud connectivity at the start of the deployment (via dhcp) ... and keep it throughout the script too. If they lose connectivity during one of the steps they will roll back to the last safe configuration. When restricting vlans on trunks this can cause issues so the order of the steps is important.   So thoroughly test your script before rollout. ... View more

I have the same. I have an event for one of my wired clients in security center. But if I go to the normal event log in Network-wide > Event-log can't find that event either. Whatever I select as source in the drop-down (for switches or for security appliances).   It's probably a bug as I would expect them to appear in the normal log as well... seeing as there are filter categories for them (e.g. "security blocked file" would be the relevant one for my event).   I'd open a support ticket. ... View more

@PhilipDAth You're thinking of the MR42 and above. Its datasheet mentions the reduced functionality.   The MR33 only uses max 11W so 802.3af is sufficient. ... View more

@Richard_W wrote: Any diff between MS210 and MS220? If the question was really that... the MS220 (non-compact) is EOL and didn't support stacking. MS210 is a current model and supports stacking. MS220 has the compact model mentioned in this topic, the MS210 doesn't, see below.   Datasheets here: https://meraki.cisco.com/lib/pdf/meraki_datasheet_ms210.pdf https://meraki.cisco.com/lib/pdf/meraki_datasheet_ms_220_320_only.pdf   However I assume your question was really whether there is a difference between MS120-8FP and MS220-8P. Then the answer is that the MS120-8FP is much more compact and that there's a lower PoE budget version of it called MS120-8LP. The MS220-8P is EOL. Datasheets: https://meraki.cisco.com/lib/pdf/meraki_datasheet_ms120_compact.pdf https://meraki.cisco.com/lib/pdf/meraki_datasheet_ms220_compact.pdf ... View more

Can you test the port forwarding from the subnet connected to the MX's WAN interface? So basically from a computer connected to the 192.168.1.199 subnet.   Perhaps it might also be a good idea to use a different port than port 80 on the outer side of the MX. While it should work it breaks the local webpage functionality of the MX. ... View more

The value you set usually results from a wireless site survey.   In any case the values you set must result in an EIRP below what your wireless regulatory domain allows.   Your antenna is an 8.5dBi antenna. Here in Belgium the max EIRP is 20dBm. The value you set + 8.5dBi (- any cable losses) should in our case stay below 20.   Transmit_Power_and_Antenna_Configuration   ... View more

Gratz to the winners! ... View more